Go to homepage
€0.00*

Filter products

–
Allcon 10 Konstruktionsklebstoff
Allcon 10 construction adhesive
Allcon 10 construction adhesive – the original Weather-resistant per DIN EN 204 D4, test report available, bonds virtually all materials, one-component, easy handling, solvent-free, ageing-resistant, resistant to many chemicals, frost-proof, natural stone compatible, GEV-EMICODE® EC 1Plus – very low emission. Areas of application Bonding skirting boards and metal thresholds Fixing covers For installing cable ducts For levelling minor unevenness For repairing torn-out screws, hinges etc. For gluing wood Bonding foam (EPS), e.g. bath supports and insulating materials The applications are almost unlimited Not suitable for glass, surfaces containing bitumen or wax, PE, PP, PA, EPDM, PTFE and underwater bonding. Due to the wide variety of paint and coating qualities, a compatibility test is recommended before painting over. The paint must be elastic enough to allow application on this product. Application advantages Use with standard cartridge guns Load-bearing after just approx. 7 to 10 minutes Usable without primer Replaces many other adhesives and glues Safety in application Always the right product at hand Opened cartridge keeps for approx. 10 months, unopened approx. 18 months Good dosability Paintable and coatable Usable indoors and outdoors Technical data Curing: approx. 3 mm of Allcon10 per 24 hours; for full-surface bonding approx. 70% cured after 7 to 10 minutes – 100% after 30 to 45 minutes Base: polyurethane, moisture-curing Density: approx. 1.4 g/cm³ Tested: test report to DIN EN 204 D4 (waterproof gluing), per WATT 91 (+80° C) Odour: low odour Shelf life: approx. 10 months once opened, approx. 1½ years unopened Skin formation time: approx. 3 minutes at standard climate (+23° C/50% relative humidity) Storage: dry, at room temperature Gap bridging: approx. 1.0 cm Temperature: resistant from -40° C to +80° C (short-term +120° C) Workable: from +5° C to max. +40° C Viscosity: pasty Areas of application Joining wood, chipboard, fibreboards, MDF, coated boards, metals, aluminium, natural and artificial stone, concrete, marble, ceramics, plastics, gypsum boards, foam (EPS), rigid foam, acrylic, insulation and much more.

Content: 12 Piece (€16.19* / 1 Piece)

€194.25*
Details
EGO SMP 805 KLEB-& DICHTFIX
EGO SMP 805 KLEB-& DICHTFIX
EGO SMP 805 – SMP hybrid sealant for versatile adhesive & sealant applications EGO SMP 805 is a one-component elastic hybrid adhesive and sealant with a broad adhesion spectrum. This product is distinguished by its versatile applicability and silicone-free formulation. The sealant cures with atmospheric moisture to an elastic end product, making it ideal for bonding and for sealing connection joints. Why EGO SMP 805? Versatile applicability: Suitable for silicone-free applications indoors and outdoors on sensitive substrates such as natural stone, aluminium, concrete, stainless steel, enamel, fibre cement, glass, wood, ceramics, plastic, metal and render. Not suitable for: PP, PE, silicone, bitumen etc. Odourless, silicone-free, isocyanate-free, solvent-free: For environmentally friendly, user-friendly use. One-part system: Easy application  100% solvent-free: Environmentally friendly formulation. Odour-neutral: Pleasant application without unpleasant odours. Neutral-curing: No interaction with adjacent parts UV, ageing and weather resistant: Reliable protection in a wide range of application areas. Virtually no shrinkage: Ensures a permanently elastic bond. Paint compatible: Enables a visually appealing surface as required. Areas of application EGO SMP 805 is used in numerous areas, including: Foodstuffs Facades Industry Construction Automotive Roofs Windows Floors Caravans HVAC Household appliances Doors Footpaths Wood Metal Glass Concrete Rely on the versatility of EGO SMP 805 for durable adhesive & sealant applications. Order now for the highest quality and professional results!

Content: 20 Piece (€9.39* / 1 Piece)

€187.89*
Details
EGOSILICON 300 BAUDICHT Neutralsilikon
EGOSILICON 300 BAUDICHT neutral silicone
EGOSILICON 300 BAUDICHT – Neutral-curing silicone sealant for building seals EGOSILICON 300 is the ideal one-part silicone sealant for building seals. By reacting with atmospheric moisture, it vulcanises to an elastic end product and offers maximum flexibility and sealing performance. Areas of application EGOSILICON 300 is perfectly suited for connection and movement joints on all common substrates in the construction sector. Note that it is not suitable for natural stone, non-ferrous metals, EPDM, PE, PP, black coatings, Teflon or substrates containing bitumen, wax or paraffin. Properties One-part system 100% solvent-free Fungicidal (mould-inhibiting) formulation Neutral-curing UV, ageing and weather resistant Rely on the high quality of EGOSILICON 300 BAUDICHT for building seals. Order now and benefit from reliable sealing in a wide range of application areas such as masonry, facades, roofs, ventilation systems, cleanrooms, marine, transport, HVAC, electrical engineering, air-handling systems, wood, metal, glass, plastic, concrete, render and parquet.

Content: 0.31 Litre (€29.35* / 1 Litre)

€9.10*
Details
EGOSILICON 333 GLASFASSADE
EGOSILICON 333 GLASS FACADE
EGOSILICON 333 GLASS FACADE – The reliable silicone sealant for modern glass architecture For robust, weather-resistant sealing on silicone-bonded external facades and structural glazing applications, EGOSILICON 333 GLASS FACADE is the ideal solution. This high-quality one-part silicone sealant not only offers first-class adhesion and mechanical strength but also vulcanises to an elastic end product that withstands the most demanding conditions. Properties: Neutral-curing (oxime) for optimal performance Abrasion-resistant and extremely strong adhesion Fast curing and tack-free in a very short time Excellent weather, ageing and UV resistance Areas of application: EGOSILICON 333 GLASS FACADE is perfectly suited for glass facades, roof glazing, conservatories and for sealing silicone-bonded insulating glass units and laminated safety glass. Its versatility and high performance make it the preferred choice for architects and construction companies that value quality and reliability.

Content: 0.31 Litre (€35.32* / 1 Litre)

From €10.95*
Details
OTTOCOLL® M500 Der wasserbeständige Premium-Hybrid-Kleb-/Dichtstoff
OTTOCOLL® M500 The water-resistant premium hybrid adhesive/sealant
OTTOCOLL® M 500 – The premium hybrid adhesive for elastic, stress-equalising bonds The premium hybrid adhesive OTTOCOLL® M 500 is the ideal choice for elastic, stress-equalising bonds between the most diverse materials. Thanks to its excellent adhesion and application properties, the adhesive can be used without problems on many substrates without primer pre-treatment. Bonding is even possible on damp substrates. Once cured, the adhesive is also extremely water-resistant. Areas of application: Bonding stone, natural stone and ceramics Bonding painted and enamelled glass Bonding OTTOFLEX® waterproofing membrane / waterproofing and uncoupling membrane in the overlap area and with accessories such as sealing tape, waterproofing corners and sealing gaskets (per the requirements of ETAG 022 and tested to abP principles) Bonding mirrors to ceramics, glass, plastic, stainless steel, aluminium, wood, concrete etc. Bonding window sills, skirting boards, decorative trims and stair treads Bonding in body and vehicle construction, wagon and container construction, metal and apparatus engineering, shipbuilding Bonding in areas near foodstuffs Bonding and assembling the most diverse materials such as wood, wood-based materials, plastics, metals and mineral substrates Properties: Extremely water-resistant – for bonds subject to high water exposure Very good adhesion to many materials – usable on many materials without pre-treatment Natural stone compatible – causes no staining on natural stones Also adheres to damp substrates Elastic – compensates for movement Paintable / can be coated – please observe the application notes in the technical data sheet Silicone-free Isocyanate-free Standards and tests: Meets the fire behaviour requirements of EN 13501: Class E Declaration of safety – tested for use near foodstuffs (ISEGA Forschungs- und Untersuchungs-Gesellschaft mbH, Aschaffenburg) EMICODE® EC 1 Plus – very low emission French VOC emission class A+ Declared in Baubook Austria Tested in combination with OTTOFLEX® waterproofing membrane / waterproofing and uncoupling membrane for the issue of a general building-authority test certificate

Content: 0.31 Litre (€27.45* / 1 Litre)

€8.51*
Details
OTTOCOLL® P 83 Der hochelastische PU-Klebstoff
OTTOCOLL® P 83 The highly elastic PU adhesive
OTTOCOLL® P 83 – The highly elastic PU adhesive The highly elastic special PU adhesive OTTOCOLL® P 83 is perfect for vibration- and movement-compensating bonds. It does not foam and, once cured, withstands high chemical and very high mechanical loads. The adhesive also holds an ISEGA declaration of safety for areas near foodstuffs. Areas of application: Bonding in body, wagon and container construction, metal and apparatus engineering, shipbuilding Bonding and assembling the most diverse materials such as wood, wood-based materials, plastics, metals and mineral substrates Properties: Highly elastic – compensates for large movements Extremely resistant to mechanical stress – withstands high impact, shock and peel loads Good chemical resistance – usable in chemically highly stressed areas Does not foam – no weighting down necessary Silicone-free Standards and tests: Meets the fire behaviour requirements of EN 13501: Class E Declaration of safety – tested for use near foodstuffs (ISEGA Forschungs- und Untersuchungs-Gesellschaft mbH, Aschaffenburg) EMICODE® EC 1 Plus – very low emission French VOC emission class A+

Content: 0.31 Litre (€35.55* / 1 Litre)

€11.02*
Details
OTTOSEAL® M 350 Der Glasfalz Hybrid-Dichtstoff
OTTOSEAL® M 350 The glazing rebate hybrid sealant
One-part hybrid polymer STP sealant for indoors and outdoors Areas of application Glazing rebate sealing on wooden windows Sealing connection joints on windows and doors made of wood, metal and plastic Sealing pipe and antenna penetrations Sealing joints on facades and metal constructions Sealing air-conditioning and ventilation systems Suitable for glazing systems with a free sealant bevel Va1 to DIN 18545 and ÖNORM 3724 Properties Non-corrosive to unprotected metal surfaces Silicone-free Paintable / can be coated – please observe the application notes in the technical data sheet Good weather and ageing resistance Standards and tests Tested to EN 15651 – Part 1: F EXT-INT CC 25 HM Tested to EN 15651 – Part 2: G CC 25 HM Tested fire behaviour to EN 13501: Class E Meets the requirements of DIN 18545, stress groups A and D Meets the requirements of ISO 11600 G 25 HM Suitable for use in HVAC systems in accordance with VDI 6022, Sheet 1, tested to DIN EN ISO 846 (Institute for Hygiene, Berlin) French VOC emission class A+ Declared in Baubook Austria Suitable for applications in accordance with IVD data sheets no. 9+12+20+24+27+29+31+32+35 Rely on the quality of this one-part hybrid polymer STP sealant for your building seals. Order now and benefit from its versatile applications!

Content: 0.3 Litre (€32.17* / 1 Litre)

€9.65*
Details
OTTOSEAL® M390 - Der Boden-Dichtstoff
OTTOSEAL® M390 – The floor sealant
OTTOSEAL® M 390 – Silicone-free floor sealant OTTOSEAL® M 390 is a true all-rounder for floor areas. With its high elasticity and good workability, it forms a robust, highly resilient surface once cured. This withstands not only mechanical but also chemical stress. The sealant is therefore ideal for expansion and connection joints with a wide range of floor coverings. Areas of application Sealing joints on parquet, laminate, wood, cork, plastic and vinyl floors Sealing mechanically highly stressed movement and connection joints in warehouses and production halls, workshops, yard areas, wash bays, parking decks, underground car parks etc. Sealing chemically highly stressed floor and connection joints in dairies, slaughterhouses, beverage and food factories, commercial kitchens etc. Stress-equalising sealing of floor and connection joints indoors and outdoors on footpaths, balconies, terraces and public areas Sealing movement joints between concrete slabs Properties Very high mechanical strength, notch and tear resistance – resistant to high mechanical stress (e.g. machine cleaning with high-pressure cleaners) Good chemical resistance – usable in chemically highly stressed areas Very good adhesion to many materials – usable on many materials without pre-treatment Cures with virtually no shrinkage – no reworking and no concave fillets prone to soiling Extremely elastic – compensates for movement Low odour – no odour nuisance Silicone-free Sandable and paintable after curing – visually flawless joint matching Isocyanate-free Good weather and ageing resistance Standards and tests Tested to EN 15651 – Part 1: F EXT-INT CC 25 HM Tested to EN 15651 – Part 4: PW EXT-INT CC 25 HM Tested fire behaviour to EN 13501: Class E Declaration of safety – tested for use near foodstuffs (ISEGA Forschungs- und Untersuchungs-Gesellschaft mbH, Aschaffenburg) EMICODE® EC 1 Plus – very low emission French VOC emission class A+ Declared in Baubook Austria Suitable for applications per IVD data sheets no. 1+8+21+35 Rely on the versatility and quality of OTTOSEAL® M 390 for professional floor sealing applications. Order now!

Content: 0.31 Litre (€24.16* / 1 Litre)

€7.49*
Details
OTTOSEAL® S 7 Das Weather-Sealing-Silikon
OTTOSEAL® S 7 The weather-sealing silicone
Weather-sealing silicone Product properties and advantages: One-part oxime silicone sealant: Neutral-curing and MEKO-free, ideal for indoors and outdoors. Weather-resistant: Offers excellent protection against the elements. Insulating glass and laminated safety glass: Developed specifically for use on insulating glass and laminated safety glass units. Very good workability: Easy handling and application. Areas of application: For weather-resistant joint sealing (weather sealing) on glass facades, sloped glazing, timber-glass composite elements, roof glazing and conservatories For jointing on glass elements For jointing on insulating glass units Properties: Compatible with insulating glass edge seal materials – see compatibility list Compatible with PVB films per the criteria of ift guideline DI-02/1 – suitable for working with laminated safety glass Very good weather, ageing and UV resistance Very good adhesion to many substrates even without primer (see primer table) High notch and tear resistance – withstands high mechanical stress User-friendly thanks to matt surface Long skin formation time – long working time Non-corrosive to unprotected metal surfaces Standards and tests: Tested to EN 15651 – Part 1: F EXT-INT CC 25 LM Tested to EN 15651 – Part 2: G CC 25 LM Tested fire behaviour to EN 13501: Class E Meets the requirements of DIN 18540-F Meets the requirements of ISO 11600 F 25 LM The weather-sealing silicone is the ideal sealant for all your weather-resistant sealing projects. Order today and benefit from its excellent properties and easy application!

Content: 0.31 Litre (€35.84* / 1 Litre)

€11.11*
Details
Ottoseal® S115 - Das neutrale Bau-Silikon
OTTOSEAL® S 70 The premium natural stone silicone – 400 ml aluminium foil sausage
The premium natural stone silicone OTTOSEAL® S 70 is the ideal choice for all marble and natural stone applications indoors and outdoors, without causing edge-zone staining. Available in a broad palette of colour shades, OTTOSEAL® S 70 also offers matt shades and "structure" colours with a stone-like surface. Its excellent weather resistance, ageing resistance and UV resistance, together with protection against mould growth, ensure a long-lasting, aesthetically pleasing overall appearance. Please note: for an optimal smoothing result, we recommend using the special OTTO marble silicone smoothing agent. Areas of application Sealing and jointing marble and all natural stones, e.g. sandstone, quartzite, granite, gneiss, porphyry etc., indoors and outdoors Sealing expansion joints in floor, wall and facade areas Sealing and jointing marble/natural stone swimming pools, including underwater joints For external mirror sealing in combination with natural stone Sealing painted and enamelled glass Joint filler between ceramic slabs and natural stone outdoors Movement-compensating bonding of natural stone to metal, e.g. stair treads onto a metal construction Properties Also available in "structure" colours with a stone-like surface – harmonises with textured natural surfaces Also available in matt colours – harmonises with matt and glossy surfaces Fungicidal formula – resistance to mould growth Natural stone compatible to ISO 16938-1 – causes no edge-zone staining on natural stones Non-corrosive – causes no (rust) corrosion on unprotected metal surfaces Very good weather, ageing and UV resistance – for durable applications indoors and outdoors Standards and tests Tested to EN 15651 – Part 1: F EXT-INT 25 LM and F EXT-INT CC 20 LM respectively Tested to EN 15651 – Part 3: XS 1 Tested to EN 15651 – Part 4: PW EXT-INT 25 LM – applies only to the matt shades of OTTOSEAL® S 70 – all other shades meet PW INT 12.5 E Tested to ISO 16938-1 by SKZ Würzburg (testing for edge-zone staining of natural stones by joint sealants) Tested to ASTM C 1248 by DL Laboratories New York (testing for edge-zone staining of natural stones by joint sealants) Suitable for applications per IVD data sheets no. 1+3-1+3-2+9+14+23+25+27+30+31+35 Declaration of safety – tested for use near foodstuffs (ISEGA Forschungs- und Untersuchungs-Gesellschaft mbH, Aschaffenburg) Quality seal of the IVD – German sealants industry association – tested by ift Rosenheim Compliant with Regulation (EC) No 1907/2006 (REACH) French VOC emission class A+ Declared in Baubook Austria EMICODE® EC 1 Plus – very low emission For classification under building certification schemes, see sustainability data sheet Tested fire behaviour to EN 13501: Class E

Content: 0.4 Litre (€28.75* / 1 Litre)

€11.50*
Details
OTTOSEAL® S110 Das Premium-Neutral-Silicon
OTTOSEAL® S110 The premium neutral-cure silicone
With the neutral-curing premium construction silicone OTTOSEAL® S 110, you get the all-rounder among OTTO sealants. Whether you want to seal connection joints on windows and doors, joints on facades, metal constructions or profiled glass. This premium neutral-cure silicone is also the optimal choice for expansion and connection joints on precast concrete and aerated concrete elements or in sanitary areas, always achieving perfect, durable results. OTTOSEAL® S 110 is even tested for glazing rebate sealing on wooden windows and is ideal for jointing on glass elements. Areas of application: Expansion and connection joints on precast concrete and aerated concrete elements Sealing joints on facades and metal constructions Sealing connection joints on windows and doors made of wood, metal and plastic Sealing profiled glass (e.g. Profilit glazing) Glazing rebate sealing on wooden windows Suitable for jointing on glass elements Expansion and connection joints in sanitary areas Properties: Highly abrasion-resistant and smear-free per ift guideline VE-04/2 Smear-free cleaning Fungicidal formula – resistance to mould growth Compatible with PVB films per the criteria of ift guideline DI-02/1 Non-corrosive – causes no (rust) corrosion on unprotected metal surfaces Very good adhesion to many substrates even without primer Excellent early load capacity – safety in the production process Paint compatible to DIN 52452 (not paintable) No interaction with existing and adjacent coatings Very good weather, ageing and UV resistance For durable applications indoors and outdoors Standards and tests: Tested to EN 15651 – Part 1: F EXT-INT CC 25 LM Tested to EN 15651 – Part 2: G CC 25 LM Tested to EN 15651 – Part 3: XS 1 Tested to EN 15651 – Part 4: PW INT 12.5 E Tested to ift guideline VE-04/2 Meets the requirements of DIN 18540-F Meets the requirements of ISO 11600 G 25 LM Tested to FCBA (CTBA) L 114 (suitability of sealants for glazing rebate sealing on wooden windows) Declaration of safety – tested for use near foodstuffs (ISEGA Forschungs- und Untersuchungs-Gesellschaft mbH, Aschaffenburg) Suitable for applications in accordance with IVD data sheets no. 3-1+3-2+7+9+10+13+14+19-1+20+22+24+25+27+29+31+32+35 Quality seal of the IVD – German sealants industry association – tested by ift Rosenheim Compliant with Regulation (EC) No 1907/2006 (REACH) French VOC emission class A+ Declared in Baubook Austria EMICODE® EC 1 Plus – very low emission Tested fire behaviour to EN 13501: Class E

Content: 0.31 Litre (€22.65* / 1 Litre)

€7.02*
Details
OTTOSEAL® S117 Das Standard-Naturstein-Silikon
OTTOSEAL® S117 The standard natural stone silicone
The resilient natural stone silicone OTTOSEAL® S 117 is distinguished by freedom from edge-zone staining when sealing and jointing marble and various natural stone types such as sandstone, quartzite, granite, gneiss and porphyry. The special formulation guarantees durable joints indoors and outdoors, thanks to outstanding weather, ageing and UV resistance and a fungicidal formula. Note: for a smooth finish, we recommend using the special OTTO marble silicone smoothing agent. Areas of application: Sealing and jointing marble and all natural stones indoors and outdoors Sealing expansion joints in wall and facade areas Properties: Fungicidal formula – resistance to mould growth Natural stone compatible – causes no edge-zone staining on natural stones Non-corrosive – causes no (rust) corrosion on unprotected metal surfaces Very good weather, ageing and UV resistance – for durable applications indoors and outdoors Standards and tests: Tested to EN 15651 – Part 1: F EXT-INT CC 20 LM Tested to EN 15651 – Part 3: XS 1 Suitable for applications in accordance with IVD data sheets no. 3-1+3-2+14+23+25+27+31+35 French VOC emission class A+ Tested fire behaviour to EN 13501: Class E For classification under building certification schemes, see sustainability data sheet Simplify your natural stone projects with OTTOSEAL® S 117, the reliable natural stone silicone for long-lasting, aesthetically pleasing results.

Content: 0.31 Litre (€24.39* / 1 Litre)

€7.56*
Details
OTTOSEAL® S50 Das Glasklar-Silicon
OTTOSEAL® S50 The crystal-clear silicone
OTTOSEAL® S 50 – The crystal-clear silicone OTTOSEAL® S 50 is a transparent one-part acetoxy silicone sealant suitable for both indoor and outdoor use. Curing crystal clear, this sealant provides a secure, durable seal that has proven itself particularly in glass construction, display cases and shop windows. Areas of application: Glass construction Display cases and shop windows Properties: Very good weather, ageing and UV resistance Cures to a crystal-clear silicone – ideal for unobtrusive applications Transparent – for aesthetically demanding seals Standards and tests: Meets the requirements for fire behaviour to EN 13501: Class E French VOC emission class A+ Suitable for applications in accordance with IVD data sheets no. 30+31+35 It doesn't get any clearer! Rely on OTTOSEAL® S 50 for transparent, reliable sealing in your projects.

Content: 0.31 Litre (€78.52* / 1 Litre)

€24.34*
Details
OTTOSEAL® S67 Das geruchsarme Reinraum- und RLT-Silikon
OTTOSEAL® S67 The low-odour cleanroom and HVAC silicone
The low-odour cleanroom and HVAC silicone One-part neutral-curing alkoxy silicone sealant For indoors and outdoors Excellent metal adhesion Low odour Non-corrosive Good chemical resistance Areas of application For jointing in cleanrooms and production rooms with high hygiene requirements, e.g. electronics – chip production For jointing in production rooms for pharmaceuticals and other medical articles For jointing in rooms with high hygiene requirements and frequent use of cleaning and disinfecting agents, e.g. operating theatres, medical examination rooms, medical laboratories Sealing joints in cold storage areas Suitable for jointing in hospitals and food-processing businesses Sealing air-conditioning and ventilation systems, e.g. kitchen exhaust ducts Properties Excellent metal adhesion – on many metals without pre-treatment Low odour – no odour nuisance Non-corrosive to unprotected metal surfaces Good chemical resistance (e.g. to cleaning and disinfecting agents) – no damage from aggressive cleaning and disinfection Fungicidal formula – resistance to mould growth Very good weather, ageing and UV resistance Standards and tests Meets the requirements for fire behaviour to EN 13501: Class E Tested for cleanroom applications and to DIN EN ISO 846 by ISEGA Forschungs- und Untersuchungsgesellschaft mbH, Aschaffenburg Suitable for use in HVAC systems in accordance with VDI 6022, Sheet 1 Declaration of safety – tested for use near foodstuffs (ISEGA Forschungs- und Untersuchungs-Gesellschaft mbH, Aschaffenburg) EMICODE® EC 1 Plus – very low emission French VOC emission class A+ Suitable for applications in accordance with IVD data sheets no. 31+35

Content: 0.31 Litre (€30.52* / 1 Litre)

€9.46*
Details
OTTOSEAL® S70 Das Premium-Naturstein-Silikon
OTTOSEAL® S70 The premium natural stone silicone
The premium natural stone silicone OTTOSEAL® S 70 is the ideal choice for all marble and natural stone applications indoors and outdoors, without causing edge-zone staining. Available in a wide range of colours, OTTOSEAL® S 70 also offers matt shades and "textured" colours with a stone-like surface. Its excellent weather, ageing and UV resistance, together with protection against mould growth, ensure a long-lasting, aesthetically pleasing overall appearance. Please note: for the best smoothing result, we recommend using the special OTTO marble silicone smoothing agent. Areas of application Sealing and jointing on marble and all natural stones, e.g. sandstone, quartzite, granite, gneiss, porphyry etc., indoors and outdoors Sealing expansion joints in floor, wall and facade areas Sealing and jointing marble/natural stone swimming pools, including underwater joints For external mirror sealing in combination with natural stone Sealing painted and enamelled glass Joint filler between ceramic tiles and natural stone outdoors Movement-compensating bonding of natural stone to metal, e.g. stair treads to a metal structure Properties Also available in "textured" colours with a stone-like surface – harmonises with textured natural surfaces Also available in matt colours – harmonises with matt and glossy surfaces Fungicidal formula – resistance to mould growth Natural stone compatible to ISO 16938-1 – causes no edge-zone staining on natural stones Non-corrosive – causes no (rust) corrosion on unprotected metal surfaces Very good weather, ageing and UV resistance – for durable applications indoors and outdoors Standards and tests Tested to EN 15651 – Part 1: F EXT-INT 25 LM and F EXT-INT CC 20 LM Tested to EN 15651 – Part 3: XS 1 Tested to EN 15651 – Part 4: PW EXT-INT 25 LM – applies only to the matt shades of OTTOSEAL® S 70 – all other shades meet PW INT12.5 E Tested to ISO 16938-1 by SKZ Würzburg (test for edge-zone staining of natural stones by joint sealants) Tested to ASTM C 1248 by DL Laboratories New York (test for edge-zone staining of natural stones by joint sealants) Suitable for applications in accordance with IVD data sheets no. 1+3-1+3-2+9+14+23+25+27+30+31+35 Declaration of safety – tested for use near foodstuffs (ISEGA Forschungs- und Untersuchungs-Gesellschaft mbH, Aschaffenburg) Quality seal of the IVD – German sealants industry association – tested by ift Rosenheim Compliant with Regulation (EC) No 1907/2006 (REACH) French VOC emission class A+ Declared in Baubook Austria EMICODE® EC 1 Plus – very low emission For classification under building certification schemes, see sustainability data sheet Tested fire behaviour to EN 13501: Class E

Content: 0.31 Litre (€30.52* / 1 Litre)

€9.46*
Details
OTTOSEAL® S94 Das neutrale Brandschutz-Silikon B1
OTTOSEAL® S94 The neutral-cure fire protection silicone B1
OTTOSEAL® S 94 – The neutral-cure fire protection silicone B1 OTTOSEAL® S 94 is a one-part oxime silicone sealant that is neutral-curing and MEKO-free. The sealant is distinguished by its high fire protection class B1 (flame-retardant) to DIN 4102 and offers very good weather, ageing and UV resistance. These properties make OTTOSEAL® S 94 ideal for indoor and outdoor applications with increased fire protection requirements. Product properties and advantages: B1 – flame-retardant: Classification to DIN 4102 for use where fire protection requirements are increased. Very elastic: High flexibility and movement capability for durable seals. Weather and UV resistance: Optimal for outdoor use and extreme conditions. Non-corrosive: No corrosion on unprotected metal surfaces. Paint compatible: To DIN 52452, but not paintable – no interaction with adjacent coatings. Areas of application: Sealing fire protection elements, e.g. fire-rated glazing. Joint sealing in areas with high fire protection requirements. Technical data: Flame-retardant: Building material class B1 to DIN 4102. Skin formation: approx. 10 minutes. Curing: approx. 2 mm in 24 hours at +23 °C / 50% r.h. Temperature resistance: -40 °C to +180 °C. Movement capability: 25%. Standards and tests: Tested to EN 15651 – Part 1: F EXT-INT CC 25 LM. Tested to EN 15651 – Part 2: G CC 25 LM. Tested to EN 15651 – Part 4: PW INT 12.5 E. Tested to DIN 4102-B1 – flame-retardant between solid mineral building materials (Holzforschung TU Munich). Tested to DIN 25415, Part 1 – very good decontaminability of the sealant surface (Federal Institute for Materials Research and Testing, Berlin). Quality seal of the IVD – German sealants industry association, tested by ift Rosenheim. Compliant with Regulation (EC) No 1907/2006 (REACH). With OTTOSEAL® S 94 you get a high-quality, flame-retardant sealant that is perfect for use in areas with high fire protection requirements. Ideal for fire-rated glazing and many other applications.

Content: 0.31 Litre (€32.45* / 1 Litre)

€10.06*
Details
SIKAFLEX® AT CONNECTION - Der Flexible 20x600 ml
SIKAFLEX® AT CONNECTION – The flexible one, 20x600 ml
Sikaflex® AT Connection is an outstanding one-component, isocyanate-free sealant based on silane-terminated polymer for civil engineering and building construction. It cures by reaction with atmospheric moisture to form an elastic sealant. This sealant is particularly suitable for use in living spaces, public buildings, schools and nurseries, as it is solvent-free and odour-neutral. Application: Thanks to its excellent adhesion to porous and smooth substrates, Sikaflex® AT Connection is ideal for connection joints in building construction. This includes windows and doors, roller shutter boxes, facades in metal construction, metal claddings and plastic components indoors and outdoors. Its suitability in accordance with the RAL installation guide deserves particular mention. Sikaflex® AT Connection is also used for certain fire-rated joint seals in horizontal and vertical building elements. Advantages: Very high UV resistance and colour stability Primerless application on many metals and plastics Particularly suitable for connection joint sealing in accordance with the RAL installation guide EMICODE EC1PLUS, very low emission Solvent-free Very good application properties, especially tooling and extrusion behaviour Very broad adhesion spectrum on porous and smooth building materials Permissible total deformation 25% Packaging: Foil sausage with 600 ml, 20 foil sausages per box Colours: Grey (equivalent to concrete grey), medium grey, white (equivalent to uniform white), light concrete grey, anthracite grey, black Test certificates: ISO 11 600 F 25 HM / 20 LM SKZ Würzburg Declaration of performance and CE marking to DIN EN 15651-1 – joint sealants for facade elements – classification F EXT-INT CC 25 LM CE marking and declaration of performance ETA 20/1111 based on EAD 350141-00-1106:2017 – fire protection and fire sealing products, linear joint and gap sealing EMICODE EC1PLUS, very low emission Cleanroom: CSM TVOC tested (ISO-AMC Class-4.6) Cleanroom: CSM biological resistance – very good DIN EN 13501-1 Class E (fire behaviour), flow behaviour 0 mm, very good (DIN EN ISO 10 563) Application notes: Air temperature: between +5 °C and +40 °C Substrate temperature: between +5 °C and +40 °C (the substrate temperature must be +3 °C above the dew point) Substrate moisture: dry Backing material: only closed-cell PE backing profiles / backer rods (available here in the shop) Note: Correct joint dimensioning must be observed and is described in the approval (ETA 20/1111). For further information, please contact us. Curing rate: ~2 mm/24 h (+23 °C / 50% r.h.) Skin formation time: ~60 min (+23 °C / 50% r.h.)

Content: 20 Piece (€6.84* / 1 Piece)

From €136.85*
Details
SikaHyflex®-250 Facade 600 ml - Elastischer witterungsbeständiger Hochleistungsdichtstoff für die Fassade
SikaHyflex®-250 Facade 600 ml – Elastic, weather-resistant high-performance sealant for facades
Colour: concrete grey
SikaHyflex®-250 Facade – Elastic, weather-resistant high-performance sealant for facades SikaHyflex®-250 Facade is a moisture-curing, elastic one-part high-performance sealant based on i-Cure™ polyurethane technology for building construction. It is designed specifically for joint sealing in accordance with DIN 18540, but is also suitable for connection joints. Application: For joints in building construction that must be sealed in accordance with the rules of DIN 18540. Also suitable for connection joints on windows and doors, concrete and rendered facades, natural stone facades, balcony parapets and gallery railings, and many other components. SikaHyflex®-250 Facade can also be used for certain fire-rated joint seals in horizontal and vertical building elements. However, this is only done in combination with a suitable fire protection joint cord. Advantages: Meets DIN 18 540-fb Very good adhesion to common building materials in combination with the appropriate pre-treatments Solvent-free, odourless Very good ageing and weather resistance Excellent application properties, very good tooling Permissible total deformation 25% (7.5% in combination with fire protection joint cord as a fire-rated joint) Low stress on the joint flanks Bubble-free curing Tack-free surface Test certificates: DIN 18 540-fb, SKZ Würzburg ISO 11 600 F 25 LM, SKZ Würzburg CE marking and declaration of performance to DIN EN 15651-1 – joint sealants for facade elements – classification F EXT-INT CC 25 LM CE marking and declaration of performance ETA 20/1111 based on EAD 350141-00-1106:2017 – fire protection and fire sealing products – linear joint and gap sealing EMICODE EC1PLUS, very low emission Declaration of safety for contact with foodstuffs, ISEGA DIN EN 13501-1 Class E (fire behaviour) Substrate pre-treatment: The joint flanks must be load-bearing, firm, clean, dry and free of oil, grease, loose particles, cement laitance, paints, water repellents and anti-graffiti coatings.

Content: 20 Piece (€7.15* / 1 Piece)

€143.09*
Details
This website uses cookies to ensure the best experience possible. More information...