Construction foams – Specialist foams for installation, insulation and sealing

Other construction foams

Under other construction foams you will find a wide selection of specialist foams for different requirements in the construction and installation sector. These include multi-purpose foams, heat protection foams, foams for winter conditions, low-expansion foams and further PU foam variants that can be used depending on the project requirements.

These versatile foams impress with excellent adhesion, good insulating performance and high dimensional stability. They are suitable for filling cavities, sealing connections, thermal insulation and repair work in hard-to-reach places. Find the right construction foam for every application.

BEKO well foam

Well foam one-part – Waterproof special PU foam for wells, cisterns and house connections Well foam is a high-quality one-component polyurethane foam, developed specifically for sealing, filling and fixing in damp or wet environments. The foam is waterproof up to 0.8 bar (equivalent to an 8 m water column) and resistant to municipal wastewater. Once cured, it is non-toxic, ageing- and frost-resistant – ideal for professional applications in the construction and wastewater sector. Product properties: One-part PU foam – moisture-curing Waterproof up to 0.8 bar (with a test report) Resistant to municipal wastewater High foam yield: approx. 42 litres (12–16 linear metres) Frost- and ageing-resistant Non-toxic when cured Can be plastered and painted over Application advantages: Replaces laborious mortar work Fast curing: approx. 25 minutes (with a 3 cm bead) Easy application thanks to the resealable tube system Reliably fills cavities – clean, safe handling Universally usable for indoor and outdoor areas Areas of application: Sealing rebated manhole rings, cisterns, domestic sewage treatment plants Filling and sealing wall openings and house connections Sealing wall thicknesses against moisture Technical data: Base: polyurethane prepolymer, moisture-curing Curing: approx. 25 minutes (at +20 °C, 65% RH) Skin formation time: approx. 15 minutes Compressive strength: 8 N/cm² (DIN 53 421 at 10% compression) Temperature resistance: -40 °C to +110 °C (short-term +150 °C) Application temperature: from +3 °C (can: +10 °C to +30 °C) Shelf life: 12 months at +20 °

Content: 0.75 Litre (€20.53* / 1 Litre)

€15.40*

Details

OTTOPUR OP 915 - Der Dosierschaum mit sehr guter Schall- und Wärmedämmung

OTTOPUR OP 915 – The dosing foam with very good sound and thermal insulation

PU foam OTTOPUR OP 915 – Sound insulation and thermal insulation in one The PU foam OTTOPUR OP 915 impresses with outstanding sound insulation values and efficient thermal insulation. Perfectly suited for installing and insulating window and door frames, window sills and internal partition walls, and for joining well and manhole rings. It is also particularly suitable for narrow seals in old-building renovation and can be used to bond rigid polystyrene foam boards as perimeter insulation to DIN 4108-2. Areas of application: Installing and insulating window and door frames made of wood, steel or plastic in masonry Installing and insulating internal partition walls, window sills etc. Filling cavities of all kinds Particularly suitable for narrow seals, e.g. in old-building renovation Joining well and manhole rings in sewer access shafts and domestic sewage treatment plants For bonding rigid polystyrene foam boards as perimeter insulation to DIN 4108-2 Properties: Very good sound and thermal insulation 60 dB sound insulation to EN ISO 717-1 0.038 W/mK insulation value to DIN 52612 Foam yield approx. 36 litres per 500 ml can Cuttable after approx. 35 minutes Fully load-bearing after approx. 24 hours Standards and tests: General building-authority test certificate – normally flammable building material (B2) to DIN 4102-1 EMICODE® EC 1 Plus – very low emission French VOC emission class A+ Note: a suitable dosing gun is required to apply OTTOPUR OP 915.

Content: 0.5 Litre (€12.70* / 1 Litre)

€6.35*

Details

OTTOPUR OP 950 Der Flexi-Schaum bis -10°C

OTTOPUR OP 950 The flexi foam down to -10°C

The flexi foam down to -10°C Properties and advantages: One-part PU dosing foam: High-quality polyurethane foam for a wide range of applications. Very flexible: The foam remains flexible even after curing and permanently absorbs component movement. Workable down to -10 °C: Can be used even at low winter temperatures. Excellent sound insulation: Offers sound insulation of 63 dB to EN ISO 717-1. Very good thermal insulation: With an insulation value of 0.035 W/mK to DIN 52612. Areas of application: Installing and insulating window and door frames: Ideal for frames made of wood, steel or plastic in masonry. Filling and insulating joints and cavities: Perfect for loft conversions and roof insulation. Foam-filling small wall recesses and cable penetrations: Flexibly usable for various cavities. Detailed product description: The PU foam OTTOPUR OP 950 is a flexible one-part PU dosing foam that can be applied even in extreme winter conditions down to –10 °C. With its high movement absorption, this foam is ideal for filling and insulating joints and cavities, particularly in loft conversions and roof insulation. Thanks to its excellent sound insulation and thermal insulation properties, the flexi foam meets the highest demands for energy efficiency and living comfort. With a foam yield of approx. 44 litres per 750 ml can and cuttability after just 35 minutes, the flexi foam enables fast, efficient processing. After approx. 12 hours the foam is fully load-bearing, offering a durable, secure solution for your insulation projects. Technical data: Workability: down to -10°C Sound insulation: 63 dB to EN ISO 717-1 Insulation value: 0.035 W/mK to DIN 52612 Foam yield: approx. 44 litres per 750 ml can Cuttable: after approx. 35 minutes Load-bearing: after approx. 12 hours Standards and tests: General building-authority test certificate: normally flammable building material (B2) to DIN 4102-1 EMICODE® EC 1 Plus: very low emission French VOC emission class: A+ See for yourself the quality and versatility of the flexi foam and optimise your construction and renovation projects with this powerful PU dosing foam!

Content: 0.75 Litre (€14.39* / 1 Litre)

€10.79*

Details

OTTOPUR OP 960 The B1 dosing foam

The B1 dosing foam Product properties and advantages: One-part PU dosing foam: For a wide range of applications indoors and outdoors. B1 – flame-retardant: Meets high fire protection requirements to DIN 4102 Part 1. High foam yield: Delivers approx. 45 litres of foam per 750 ml can. Smoke-tight: Supports the smoke-tight installation of protective doors. Properties: Supports the smoke-tight installation of protective doors 60 dB sound insulation to EN ISO 717-1 0.036 W/mK insulation value to DIN 52612 Cuttable after approx. 50 minutes Load-bearing after approx. 12 hours General building-authority test certificate to DIN 4102-1 B1 EMICODE® EC 1 Plus – very low emission French VOC emission class A+ Areas of application: Window installation: for clean, controlled backfilling and the insulating sealing of connection joints on windows and roller shutter boxes Filling connection joints on external door frames, but not for pure installation purposes without additional mechanical fixing Foam-filling small wall recesses, cable penetrations of all kinds and other cavities The PU foam OTTOPUR OP 960 is a reliable dosing foam, tested and approved to building material class B1 – flame-retardant. This foam is the perfect choice for all installation and insulation work where increased fire protection requirements apply. Order the B1 dosing foam now and benefit from its high foam yield, excellent insulation and sound protection values and safe, smoke-tight application!

Content: 0.75 Litre (€14.48* / 1 Litre)

€10.86*

Details

Ottopur OP910 - 1K-PU-Schaum für Schallschutz, Wärmedämmung, Brunnen und Perimeter

Ottopur OP910 – One-part PU foam for sound insulation, thermal insulation, wells and perimeter

PU foam OTTOPUR OP 910 – Sound and thermal insulation in one The PU foam OTTOPUR OP 910 is a gun foam with outstanding sound insulation values and excellent thermal insulation. It is perfect for installing and insulating window and door frames, window sills and interior partition walls, and for joining well and shaft rings. It can also be used for bonding polystyrene rigid foam boards as perimeter insulation to DIN 4108-2. Areas of application: Installation and insulation of window and door frames made of wood, steel or plastic in masonry Installation and insulation of interior partition walls, window sills etc. Filling cavities of all kinds Joining well and shaft rings in manholes and domestic sewage treatment systems Bonding polystyrene rigid foam boards as perimeter insulation to DIN 4108-2 Properties: Very good sound and thermal insulation 60 dB sound insulation to EN ISO 717-1 0.035 W/mK insulation value to DIN 52612 Foam yield approx. 45 litres per 750 ml can Cuttable after approx. 30 minutes Load-bearing after approx. 3–5 hours Standards and tests: General building inspectorate test certificate: normally flammable building material (Class E to DIN EN 13501-1) EMICODE® EC 1 Plus – very low emission French VOC emission class A+ Note: A suitable dosing gun is required to apply OTTOPUR OP 910.

Content: 0.75 Litre (€9.45* / 1 Litre)

€7.09*

Details

Filter products

Other construction foams