Go to homepage
€0.00*

Filter products

–
Allcon 10 Konstruktionsklebstoff
Allcon 10 construction adhesive
Allcon 10 construction adhesive – the original Weather-resistant per DIN EN 204 D4, test report available, bonds virtually all materials, one-component, easy handling, solvent-free, ageing-resistant, resistant to many chemicals, frost-proof, natural stone compatible, GEV-EMICODE® EC 1Plus – very low emission. Areas of application Bonding skirting boards and metal thresholds Fixing covers For installing cable ducts For levelling minor unevenness For repairing torn-out screws, hinges etc. For gluing wood Bonding foam (EPS), e.g. bath supports and insulating materials The applications are almost unlimited Not suitable for glass, surfaces containing bitumen or wax, PE, PP, PA, EPDM, PTFE and underwater bonding. Due to the wide variety of paint and coating qualities, a compatibility test is recommended before painting over. The paint must be elastic enough to allow application on this product. Application advantages Use with standard cartridge guns Load-bearing after just approx. 7 to 10 minutes Usable without primer Replaces many other adhesives and glues Safety in application Always the right product at hand Opened cartridge keeps for approx. 10 months, unopened approx. 18 months Good dosability Paintable and coatable Usable indoors and outdoors Technical data Curing: approx. 3 mm of Allcon10 per 24 hours; for full-surface bonding approx. 70% cured after 7 to 10 minutes – 100% after 30 to 45 minutes Base: polyurethane, moisture-curing Density: approx. 1.4 g/cm³ Tested: test report to DIN EN 204 D4 (waterproof gluing), per WATT 91 (+80° C) Odour: low odour Shelf life: approx. 10 months once opened, approx. 1½ years unopened Skin formation time: approx. 3 minutes at standard climate (+23° C/50% relative humidity) Storage: dry, at room temperature Gap bridging: approx. 1.0 cm Temperature: resistant from -40° C to +80° C (short-term +120° C) Workable: from +5° C to max. +40° C Viscosity: pasty Areas of application Joining wood, chipboard, fibreboards, MDF, coated boards, metals, aluminium, natural and artificial stone, concrete, marble, ceramics, plastics, gypsum boards, foam (EPS), rigid foam, acrylic, insulation and much more.

Content: 12 Piece (€16.19* / 1 Piece)

€194.25*
Details
EGO SMP 805 KLEB-& DICHTFIX
EGO SMP 805 KLEB-& DICHTFIX
EGO SMP 805 – SMP hybrid sealant for versatile adhesive & sealant applications EGO SMP 805 is a one-component elastic hybrid adhesive and sealant with a broad adhesion spectrum. This product is distinguished by its versatile applicability and silicone-free formulation. The sealant cures with atmospheric moisture to an elastic end product, making it ideal for bonding and for sealing connection joints. Why EGO SMP 805? Versatile applicability: Suitable for silicone-free applications indoors and outdoors on sensitive substrates such as natural stone, aluminium, concrete, stainless steel, enamel, fibre cement, glass, wood, ceramics, plastic, metal and render. Not suitable for: PP, PE, silicone, bitumen etc. Odourless, silicone-free, isocyanate-free, solvent-free: For environmentally friendly, user-friendly use. One-part system: Easy application  100% solvent-free: Environmentally friendly formulation. Odour-neutral: Pleasant application without unpleasant odours. Neutral-curing: No interaction with adjacent parts UV, ageing and weather resistant: Reliable protection in a wide range of application areas. Virtually no shrinkage: Ensures a permanently elastic bond. Paint compatible: Enables a visually appealing surface as required. Areas of application EGO SMP 805 is used in numerous areas, including: Foodstuffs Facades Industry Construction Automotive Roofs Windows Floors Caravans HVAC Household appliances Doors Footpaths Wood Metal Glass Concrete Rely on the versatility of EGO SMP 805 for durable adhesive & sealant applications. Order now for the highest quality and professional results!

Content: 20 Piece (€9.39* / 1 Piece)

€187.89*
Details
EGOSILICON 300 BAUDICHT Neutralsilikon
EGOSILICON 300 BAUDICHT neutral silicone
EGOSILICON 300 BAUDICHT – Neutral-curing silicone sealant for building seals EGOSILICON 300 is the ideal one-part silicone sealant for building seals. By reacting with atmospheric moisture, it vulcanises to an elastic end product and offers maximum flexibility and sealing performance. Areas of application EGOSILICON 300 is perfectly suited for connection and movement joints on all common substrates in the construction sector. Note that it is not suitable for natural stone, non-ferrous metals, EPDM, PE, PP, black coatings, Teflon or substrates containing bitumen, wax or paraffin. Properties One-part system 100% solvent-free Fungicidal (mould-inhibiting) formulation Neutral-curing UV, ageing and weather resistant Rely on the high quality of EGOSILICON 300 BAUDICHT for building seals. Order now and benefit from reliable sealing in a wide range of application areas such as masonry, facades, roofs, ventilation systems, cleanrooms, marine, transport, HVAC, electrical engineering, air-handling systems, wood, metal, glass, plastic, concrete, render and parquet.

Content: 0.31 Litre (€29.35* / 1 Litre)

€9.10*
Details
OTTOCOLL® M500 Der wasserbeständige Premium-Hybrid-Kleb-/Dichtstoff
OTTOCOLL® M500 The water-resistant premium hybrid adhesive/sealant
OTTOCOLL® M 500 – The premium hybrid adhesive for elastic, stress-equalising bonds The premium hybrid adhesive OTTOCOLL® M 500 is the ideal choice for elastic, stress-equalising bonds between the most diverse materials. Thanks to its excellent adhesion and application properties, the adhesive can be used without problems on many substrates without primer pre-treatment. Bonding is even possible on damp substrates. Once cured, the adhesive is also extremely water-resistant. Areas of application: Bonding stone, natural stone and ceramics Bonding painted and enamelled glass Bonding OTTOFLEX® waterproofing membrane / waterproofing and uncoupling membrane in the overlap area and with accessories such as sealing tape, waterproofing corners and sealing gaskets (per the requirements of ETAG 022 and tested to abP principles) Bonding mirrors to ceramics, glass, plastic, stainless steel, aluminium, wood, concrete etc. Bonding window sills, skirting boards, decorative trims and stair treads Bonding in body and vehicle construction, wagon and container construction, metal and apparatus engineering, shipbuilding Bonding in areas near foodstuffs Bonding and assembling the most diverse materials such as wood, wood-based materials, plastics, metals and mineral substrates Properties: Extremely water-resistant – for bonds subject to high water exposure Very good adhesion to many materials – usable on many materials without pre-treatment Natural stone compatible – causes no staining on natural stones Also adheres to damp substrates Elastic – compensates for movement Paintable / can be coated – please observe the application notes in the technical data sheet Silicone-free Isocyanate-free Standards and tests: Meets the fire behaviour requirements of EN 13501: Class E Declaration of safety – tested for use near foodstuffs (ISEGA Forschungs- und Untersuchungs-Gesellschaft mbH, Aschaffenburg) EMICODE® EC 1 Plus – very low emission French VOC emission class A+ Declared in Baubook Austria Tested in combination with OTTOFLEX® waterproofing membrane / waterproofing and uncoupling membrane for the issue of a general building-authority test certificate

Content: 0.31 Litre (€27.45* / 1 Litre)

€8.51*
Details
OTTOSEAL® A 205 Der Premium-Acryl-Dichtstoff
OTTOSEAL® A 205 The premium acrylic sealant
OTTOSEAL® A 205 – Premium acrylic sealant for perfect connection joints OTTOSEAL® A 205 is the premium acrylic sealant whose flexible properties make it suitable even for larger joint movements. Thanks to its paintability with standard emulsion paints and its resistance to yellowing or greying, it is the ideal choice for connection joints in interior finishing on walls and ceilings. Why OTTOSEAL® A 205? Flexible application: With 18% permissible total deformation to ISO 9046, the sealant is also suitable for large joint movements. No colour change: No yellowing or greying after curing, for a permanently appealing appearance. Frost-insensitive: Can be stored and transported for up to 48 hours at max. -10 °C. Paintable: Enables matching to the surrounding colour and elastic protective coatings. Good UV resistance: Long service life even in weathered areas. Areas of application For connection joints in plinth, wall and ceiling areas, e.g. on window sills and roller shutter boxes. Can also be used outdoors at temperatures above 5 °C. Properties at a glance Standards and tests: Tested to EN 15651 – Part 1 – F EXT-INT 12.5 P. Suitable for applications per IVD data sheets no. 12+16+20+29+31+32+35. Quality seal of the IVD – German sealants industry association – tested by ift Rosenheim. Compliant with Regulation (EC) No 1907/2006 (REACH). French VOC emission class A+. Declared in Baubook Austria. EMICODE® EC 1 Plus – very low emission. For classification under building certification schemes, see sustainability data sheet. Tested fire behaviour to EN 13501: Class E. Rely on OTTOSEAL® A 205 for perfect connection joints in interior finishing. Order now for the highest quality and professional results!

Content: 0.31 Litre (€8.65* / 1 Litre)

€2.68*
Details
Ottoseal® A215
Ottoseal® A215
OTTOSEAL® A 215 – Crack and repair filler The special crack and repair filler OTTOSEAL® A 215 has a grainy texture that adapts perfectly to rendered surfaces. UV-resistant and low-odour, this durable material is easy to work with and can readily be painted over with emulsion paint. The result is an unobtrusive, visually pleasing finish. OTTOSEAL® A 215 is primarily suited to closing masonry and render cracks and filling uneven areas. Areas of application: For closing masonry and render cracks Filling uneven areas For connection joints in plinth, wall and ceiling areas, e.g. on window sills and roller shutter boxes Can also be used outdoors at temperatures above 5 °C Properties: Grainy texture – adapts perfectly to the render structure No yellowing / greying No colour change after curing Frost-tolerant down to -10 °C for up to 48 hours Can be stored and transported at max. -10 °C for up to 48 hours Paint compatible to DIN 52452 No interaction with existing and adjacent coatings Paintable / can be coated – please observe the application notes in the technical data sheet Visual adjustments and elastic protective coating possible Good UV resistance Standards and tests: Suitable for applications in accordance with IVD data sheets no. 12+31+35 French VOC emission class A+ For classification under building certification schemes, see sustainability data sheet

Content: 0.31 Litre (€15.55* / 1 Litre)

€4.82*
Details
OTTOSEAL® M 350 Der Glasfalz Hybrid-Dichtstoff
OTTOSEAL® M 350 The glazing rebate hybrid sealant
One-part hybrid polymer STP sealant for indoors and outdoors Areas of application Glazing rebate sealing on wooden windows Sealing connection joints on windows and doors made of wood, metal and plastic Sealing pipe and antenna penetrations Sealing joints on facades and metal constructions Sealing air-conditioning and ventilation systems Suitable for glazing systems with a free sealant bevel Va1 to DIN 18545 and ÖNORM 3724 Properties Non-corrosive to unprotected metal surfaces Silicone-free Paintable / can be coated – please observe the application notes in the technical data sheet Good weather and ageing resistance Standards and tests Tested to EN 15651 – Part 1: F EXT-INT CC 25 HM Tested to EN 15651 – Part 2: G CC 25 HM Tested fire behaviour to EN 13501: Class E Meets the requirements of DIN 18545, stress groups A and D Meets the requirements of ISO 11600 G 25 HM Suitable for use in HVAC systems in accordance with VDI 6022, Sheet 1, tested to DIN EN ISO 846 (Institute for Hygiene, Berlin) French VOC emission class A+ Declared in Baubook Austria Suitable for applications in accordance with IVD data sheets no. 9+12+20+24+27+29+31+32+35 Rely on the quality of this one-part hybrid polymer STP sealant for your building seals. Order now and benefit from its versatile applications!

Content: 0.3 Litre (€32.17* / 1 Litre)

€9.65*
Details
OTTOSEAL® M361 Der STRUKTUR Hybrid-Dichtstoff für Hochbau- und Anschlussfugen
OTTOSEAL® M361 The TEXTURED hybrid sealant for building construction and connection joints
OTTOSEAL® M 361 – The textured hybrid sealant for building construction and connection joints OTTOSEAL® M 361 is an innovative one-part textured hybrid polymer STP sealant developed specifically for use in building construction and connection joints. With its unique textured appearance, the sealant adapts perfectly to the render texture of facades and delivers professional results both indoors and outdoors. Perfect for versatile applications Construction joints: Sealing to DIN 18540-F for durable, secure connections. Facades and metal constructions: Ideal for expansion and connection joints on precast concrete and aerated concrete elements. RAL installation: Suitable for airtight interior seals and driving-rain-proof exterior seals. Repairs: Perfect for closing cracks and holes in facades and interior walls, e.g. in scaffolding or painting work. Building connections: For window frames, doors, gates and transitions such as concrete wall to timber stud wall. Convincing properties Grainy texture: Adapts to render textures for a homogeneous appearance. Paintable and coatable: Enables perfect integration into the surface. Low odour: No unpleasant smell during application. Tack-free surface: Reduced soiling risk after only approx. 6 hours. Weather and ageing resistant: High durability at temperatures from -40 °C to +90 °C. Silicone- and isocyanate-free: For safe, environmentally friendly application. Standards and certificates Tested to EN 15651, ISO 11600 and EN 13501 for the highest quality. EMICODE® EC 1 Plus – very low emission. Tested airtightness and driving rain resistance to ift guidelines. French VOC emission class A+ – for clean indoor air. Why OTTOSEAL® M 361? OTTOSEAL® M 361 is the ideal choice for anyone looking for a reliable, aesthetically pleasing sealant that adapts seamlessly to render textures. Whether in building construction, connection joints or repairs – this sealant delivers outstanding results with maximum user-friendliness. Order OTTOSEAL® M 361 now in your online shop and benefit from its quality, versatility and durability!

Content: 0.31 Litre (€18.13* / 1 Litre)

From €5.62*
Details
OTTOSEAL® M390 - Der Boden-Dichtstoff
OTTOSEAL® M390 – The floor sealant
OTTOSEAL® M 390 – Silicone-free floor sealant OTTOSEAL® M 390 is a true all-rounder for floor areas. With its high elasticity and good workability, it forms a robust, highly resilient surface once cured. This withstands not only mechanical but also chemical stress. The sealant is therefore ideal for expansion and connection joints with a wide range of floor coverings. Areas of application Sealing joints on parquet, laminate, wood, cork, plastic and vinyl floors Sealing mechanically highly stressed movement and connection joints in warehouses and production halls, workshops, yard areas, wash bays, parking decks, underground car parks etc. Sealing chemically highly stressed floor and connection joints in dairies, slaughterhouses, beverage and food factories, commercial kitchens etc. Stress-equalising sealing of floor and connection joints indoors and outdoors on footpaths, balconies, terraces and public areas Sealing movement joints between concrete slabs Properties Very high mechanical strength, notch and tear resistance – resistant to high mechanical stress (e.g. machine cleaning with high-pressure cleaners) Good chemical resistance – usable in chemically highly stressed areas Very good adhesion to many materials – usable on many materials without pre-treatment Cures with virtually no shrinkage – no reworking and no concave fillets prone to soiling Extremely elastic – compensates for movement Low odour – no odour nuisance Silicone-free Sandable and paintable after curing – visually flawless joint matching Isocyanate-free Good weather and ageing resistance Standards and tests Tested to EN 15651 – Part 1: F EXT-INT CC 25 HM Tested to EN 15651 – Part 4: PW EXT-INT CC 25 HM Tested fire behaviour to EN 13501: Class E Declaration of safety – tested for use near foodstuffs (ISEGA Forschungs- und Untersuchungs-Gesellschaft mbH, Aschaffenburg) EMICODE® EC 1 Plus – very low emission French VOC emission class A+ Declared in Baubook Austria Suitable for applications per IVD data sheets no. 1+8+21+35 Rely on the versatility and quality of OTTOSEAL® M 390 for professional floor sealing applications. Order now!

Content: 0.31 Litre (€24.16* / 1 Litre)

€7.49*
Details
Ottoseal® S115 - Das neutrale Bau-Silikon
OTTOSEAL® S 100 The premium sanitary silicone
OTTOSEAL® S 100 – The premium sanitary silicone for the highest demands OTTOSEAL® S 100 is a one-part silicone sealant on an acetate basis, developed specifically for professional use in sanitary areas. With excellent application properties, outstanding resistance to mould and bacteria and a broad colour palette, this premium silicone guarantees durable, visually appealing, hygienic joints. Now also available in practical foil sausages (400 ml and 580 ml) for professional applicators, which produce less residual waste compared with conventional cartridges. Areas of application Sanitary areas: Sealing expansion and connection joints in showers, bathrooms and kitchens. Floor and wall areas: Perfect for expansion and connection joints indoors and outdoors. Profiled glass and glass blocks: Reliable seals on glass connections. Outstanding properties Excellent workability: Outstanding smoothing and modelling behaviour, ideal for fast, precise applications. Mould and bacteria resistant: Fungicidal and bacteriostatic formula, for the highest hygiene demands. Weather and UV resistance: Durable joints even under extreme conditions. Broad colour spectrum: Over 80 colours, including matt shades that harmonise perfectly with modern surfaces. Sustainable packaging: Available in 400 ml and 580 ml foil sausages, which produce considerably less waste than cartridges. Standards and tests Tested to EN 15651 – Part 1: F EXT-INT CC 25 LM. Tested to EN 15651 – Part 2: G CC 25 LM. Tested to EN 15651 – Part 3: XS 1. Tested to EN 15651 – Part 4: PW INT 12.5 E. Fire behaviour: EN 13501 – Class E. EMICODE® EC 1 Plus – very low emission. IVD quality seal – tested by ift Rosenheim. French VOC emission class A+. Compliant with REACH Regulation (EC) No 1907/2006. Suitable per IVD data sheets no. 3-1, 3-2, 14, 31 and 35. Advantages for professional applicators Thanks to the foil sausage packaging in 400 ml and 580 ml, professional users benefit from less packaging waste and more efficient material use. Compared with cartridges, squeezed-out foil sausages produce considerably less waste, which not only protects the environment but also reduces disposal costs. Why OTTOSEAL® S 100? With OTTOSEAL® S 100 you get a premium product that meets the highest demands for hygiene, durability and aesthetics. Whether for sanitary areas or demanding seals indoors and outdoors – OTTOSEAL® S 100 is the ideal choice for professional applicators who value quality and sustainability.

Content: 20 Piece (€9.76* / 1 Piece)

From €195.16*
Details
OTTOSEAL® S 17 Das neutrale Hochtemperatur-Silikon
OTTOSEAL® S 17 The neutral high-temperature silicone
OTTOSEAL® S 17 – The neutral high-temperature silicone OTTOSEAL® S 17 is a high-quality one-part silicone sealant on an oxime basis that is neutral-curing and MEKO-free. This silicone impresses with its very high temperature resistance and its non-corrosive properties. Thanks to its elasticity and good workability, the sealant is suitable for applications both indoors and outdoors. Product properties and advantages: High temperature resistance: Up to +285 °C, ideal for demanding applications at high temperatures. Non-corrosive: No attack on unprotected metal surfaces. Very elastic: Flexibility and resistance to mechanical stress. Good workability: Easy to apply and ideal for professional applications. Areas of application: Sealing and bonding cast-section boilers, flue gas boxes, tiled stoves and similar high-temperature applications For automotive applications, e.g. on engines and gearboxes Special properties: Temperature-resistant up to +285 °C Non-corrosive to unprotected metal surfaces Standards and tests: Meets the fire behaviour requirements of EN 13501: Class E French VOC emission class A+ Suitable for applications per IVD data sheets no. 31 and no. 35 Conclusion: With OTTOSEAL® S 17 you get an extremely temperature-resistant, elastic, non-corrosive sealant that is ideally suited for high-temperature applications as well as automotive use. Order now and benefit from the high quality and reliability of this product!

Content: 0.31 Litre (€50.00* / 1 Litre)

€15.50*
Details
OTTOSEAL® S 51 Das Premium-Kunststoffboden-Silikon
OTTOSEAL® S 51 The premium plastic floor silicone
OTTOSEAL® S 51 – The premium plastic floor silicone OTTOSEAL® S 51 is a specially developed one-part aminoxime silicone sealant that is MEKO-free and meets the highest requirements. Ideal for floor and connection joints on plastic and design floor coverings such as PVC, rubber, vinyl and linoleum. Product advantages Flame-retardant – building material class B1 to DIN 4102 Wide range of colours – perfectly matched to the trend colours of leading floor covering manufacturers High weather, ageing and UV resistance Tested for cleanroom applications – certified by the Hygiene Institute Gelsenkirchen Environmentally friendly – VOC emission class A+ Areas of application Perfectly suited to: Sealing floor and connection joints on plastic and design floors Joining different materials such as glass, stainless steel, aluminium and plastics Use in areas with increased fire protection requirements Technical standards & tests Tested to EN 15651 (F EXT-INT CC 25 LM & PW EXT-INT CC 25 LM) DIN 4102-B1 certification – flame-retardant Tested to DIN EN ISO 4589-2 for oxygen index Compliant with IVD data sheets no. 1+11+31+35

Content: 0.31 Litre (€52.97* / 1 Litre)

€16.42*
Details
Ottoseal® S115 - Das neutrale Bau-Silikon
OTTOSEAL® S 70 The premium natural stone silicone – 400 ml aluminium foil sausage
The premium natural stone silicone OTTOSEAL® S 70 is the ideal choice for all marble and natural stone applications indoors and outdoors, without causing edge-zone staining. Available in a broad palette of colour shades, OTTOSEAL® S 70 also offers matt shades and "structure" colours with a stone-like surface. Its excellent weather resistance, ageing resistance and UV resistance, together with protection against mould growth, ensure a long-lasting, aesthetically pleasing overall appearance. Please note: for an optimal smoothing result, we recommend using the special OTTO marble silicone smoothing agent. Areas of application Sealing and jointing marble and all natural stones, e.g. sandstone, quartzite, granite, gneiss, porphyry etc., indoors and outdoors Sealing expansion joints in floor, wall and facade areas Sealing and jointing marble/natural stone swimming pools, including underwater joints For external mirror sealing in combination with natural stone Sealing painted and enamelled glass Joint filler between ceramic slabs and natural stone outdoors Movement-compensating bonding of natural stone to metal, e.g. stair treads onto a metal construction Properties Also available in "structure" colours with a stone-like surface – harmonises with textured natural surfaces Also available in matt colours – harmonises with matt and glossy surfaces Fungicidal formula – resistance to mould growth Natural stone compatible to ISO 16938-1 – causes no edge-zone staining on natural stones Non-corrosive – causes no (rust) corrosion on unprotected metal surfaces Very good weather, ageing and UV resistance – for durable applications indoors and outdoors Standards and tests Tested to EN 15651 – Part 1: F EXT-INT 25 LM and F EXT-INT CC 20 LM respectively Tested to EN 15651 – Part 3: XS 1 Tested to EN 15651 – Part 4: PW EXT-INT 25 LM – applies only to the matt shades of OTTOSEAL® S 70 – all other shades meet PW INT 12.5 E Tested to ISO 16938-1 by SKZ Würzburg (testing for edge-zone staining of natural stones by joint sealants) Tested to ASTM C 1248 by DL Laboratories New York (testing for edge-zone staining of natural stones by joint sealants) Suitable for applications per IVD data sheets no. 1+3-1+3-2+9+14+23+25+27+30+31+35 Declaration of safety – tested for use near foodstuffs (ISEGA Forschungs- und Untersuchungs-Gesellschaft mbH, Aschaffenburg) Quality seal of the IVD – German sealants industry association – tested by ift Rosenheim Compliant with Regulation (EC) No 1907/2006 (REACH) French VOC emission class A+ Declared in Baubook Austria EMICODE® EC 1 Plus – very low emission For classification under building certification schemes, see sustainability data sheet Tested fire behaviour to EN 13501: Class E

Content: 0.4 Litre (€28.75* / 1 Litre)

€11.50*
Details
Tip
Ottoseal® S100 - Das Premium-Sanitär-Silikon
Ottoseal® S100 – The premium sanitary silicone
The premium sanitary silicone OTTOSEAL® S 100 impresses with its excellent application properties, producing a visually flawless silicone joint in no time. To ensure this result lasts, OTTOSEAL® S 100 is particularly resistant to mould growth and bacteria. It also features very good weather, ageing and UV resistance. With over 80 different colour options, nothing stands in the way of a harmonious overall look. Areas of application Expansion and connection joints in floor and wall areas Expansion and connection joints in sanitary areas Sealing glass blocks Sealing profiled glass (e.g. Profilit glazing) Properties Excellent application properties – outstanding smoothing & modelling behaviour Very good weather, ageing and UV resistance – for durable applications indoors and outdoors Fungicidal and bacteriostatic formula – resistance to mould growth and bacteria Also available in matt colours – harmonises with matt surfaces Standards and tests Tested to EN 15651 – Part 1: F EXT-INT CC 25 LM Tested to EN 15651 – Part 2: G CC 25 LM Tested to EN 15651 – Part 3: XS 1 Tested to EN 15651 – Part 4: PW INT 12.5 E Suitable for applications per IVD data sheets no. 3-1+3-2+14+31+35 Quality seal of the IVD – German sealants industry association – tested by ift Rosenheim Compliant with Regulation (EC) No 1907/2006 (REACH) French VOC emission class A+ Declared in Baubook Austria EMICODE® EC 1 Plus – very low emission For classification under building certification schemes, see sustainability data sheet Tested fire behaviour to EN 13501: Class E

Content: 0.3 Litre (€26.00* / 1 Litre)

€7.80*
Details
OTTOSEAL® S105 Das Sanitär-Silikon Kartusche
OTTOSEAL® S105 The sanitary silicone, cartridge
The sanitary silicone One-part acetoxy silicone sealant For indoors and outdoors Very good workability Durable joint Reliable protection against mould The sanitary silicone OTTOSEAL® S 105 is suitable for durable expansion and connection joints in sanitary areas that need to be highly resistant to mould growth as well as weather, ageing and UV resistant. Good workability and availability in many different colours further distinguish OTTOSEAL® S 105. Areas of application Sealing expansion and connection joints in sanitary areas Sealing expansion and connection joints in floor and wall areas Sealing profiled glass / glass blocks Properties Fungicidal formula – resistance to mould growth Very good weather, ageing and UV resistance Standards and tests Tested to EN 15651 – Part 1: F EXT-INT CC 25 LM Tested to EN 15651 – Part 2: G CC 25 LM Tested to EN 15651 – Part 3: XS 1 Tested fire behaviour to EN 13501: Class E EMICODE® EC 1 Plus – very low emission Quality seal of the IVD – German sealants industry association – tested by ift Rosenheim French VOC emission class A+ Declared in Baubook Austria Compliant with Regulation (EC) No 1907/2006 (REACH) Suitable for applications in accordance with IVD data sheets no. 3-1+3-2+14+31+35

Content: 0.31 Litre (€20.35* / 1 Litre)

€6.31*
Details
OTTOSEAL® S110 Das Premium-Neutral-Silicon
OTTOSEAL® S110 The premium neutral-cure silicone
With the neutral-curing premium construction silicone OTTOSEAL® S 110, you get the all-rounder among OTTO sealants. Whether you want to seal connection joints on windows and doors, joints on facades, metal constructions or profiled glass. This premium neutral-cure silicone is also the optimal choice for expansion and connection joints on precast concrete and aerated concrete elements or in sanitary areas, always achieving perfect, durable results. OTTOSEAL® S 110 is even tested for glazing rebate sealing on wooden windows and is ideal for jointing on glass elements. Areas of application: Expansion and connection joints on precast concrete and aerated concrete elements Sealing joints on facades and metal constructions Sealing connection joints on windows and doors made of wood, metal and plastic Sealing profiled glass (e.g. Profilit glazing) Glazing rebate sealing on wooden windows Suitable for jointing on glass elements Expansion and connection joints in sanitary areas Properties: Highly abrasion-resistant and smear-free per ift guideline VE-04/2 Smear-free cleaning Fungicidal formula – resistance to mould growth Compatible with PVB films per the criteria of ift guideline DI-02/1 Non-corrosive – causes no (rust) corrosion on unprotected metal surfaces Very good adhesion to many substrates even without primer Excellent early load capacity – safety in the production process Paint compatible to DIN 52452 (not paintable) No interaction with existing and adjacent coatings Very good weather, ageing and UV resistance For durable applications indoors and outdoors Standards and tests: Tested to EN 15651 – Part 1: F EXT-INT CC 25 LM Tested to EN 15651 – Part 2: G CC 25 LM Tested to EN 15651 – Part 3: XS 1 Tested to EN 15651 – Part 4: PW INT 12.5 E Tested to ift guideline VE-04/2 Meets the requirements of DIN 18540-F Meets the requirements of ISO 11600 G 25 LM Tested to FCBA (CTBA) L 114 (suitability of sealants for glazing rebate sealing on wooden windows) Declaration of safety – tested for use near foodstuffs (ISEGA Forschungs- und Untersuchungs-Gesellschaft mbH, Aschaffenburg) Suitable for applications in accordance with IVD data sheets no. 3-1+3-2+7+9+10+13+14+19-1+20+22+24+25+27+29+31+32+35 Quality seal of the IVD – German sealants industry association – tested by ift Rosenheim Compliant with Regulation (EC) No 1907/2006 (REACH) French VOC emission class A+ Declared in Baubook Austria EMICODE® EC 1 Plus – very low emission Tested fire behaviour to EN 13501: Class E

Content: 0.31 Litre (€22.65* / 1 Litre)

€7.02*
Details
OTTOSEAL® S117 Das Standard-Naturstein-Silikon
OTTOSEAL® S117 The standard natural stone silicone
The resilient natural stone silicone OTTOSEAL® S 117 is distinguished by freedom from edge-zone staining when sealing and jointing marble and various natural stone types such as sandstone, quartzite, granite, gneiss and porphyry. The special formulation guarantees durable joints indoors and outdoors, thanks to outstanding weather, ageing and UV resistance and a fungicidal formula. Note: for a smooth finish, we recommend using the special OTTO marble silicone smoothing agent. Areas of application: Sealing and jointing marble and all natural stones indoors and outdoors Sealing expansion joints in wall and facade areas Properties: Fungicidal formula – resistance to mould growth Natural stone compatible – causes no edge-zone staining on natural stones Non-corrosive – causes no (rust) corrosion on unprotected metal surfaces Very good weather, ageing and UV resistance – for durable applications indoors and outdoors Standards and tests: Tested to EN 15651 – Part 1: F EXT-INT CC 20 LM Tested to EN 15651 – Part 3: XS 1 Suitable for applications in accordance with IVD data sheets no. 3-1+3-2+14+23+25+27+31+35 French VOC emission class A+ Tested fire behaviour to EN 13501: Class E For classification under building certification schemes, see sustainability data sheet Simplify your natural stone projects with OTTOSEAL® S 117, the reliable natural stone silicone for long-lasting, aesthetically pleasing results.

Content: 0.31 Litre (€24.39* / 1 Litre)

€7.56*
Details
OTTOSEAL® S120 Das Premium-Glasfalz-Silikon
OTTOSEAL® S120 The premium glazing silicone
OTTOSEAL® S 120 – The premium glazing silicone Areas of application Glazing rebate sealing on wooden windows Sealing joints on facades and metal constructions Sealing connection joints on windows and doors made of wood, metal and plastic Sealing expansion and connection joints on precast concrete and aerated concrete elements Sealing profiled glass / glass blocks For jointing on glass elements For external mirror sealing in combination with materials such as ceramics, metal, glass etc. Properties Highly abrasion-resistant and smear-free per ift guideline VE-04/2 – for smear-free cleaning Very good weather, ageing and UV resistance Low odour – no odour nuisance Compatible with PVB films per the criteria of ift guideline DI-02/1 – suitable for working with laminated safety glass Very good adhesion to many substrates even without primer (see primer table) Paint compatible to DIN 52452 (not paintable) – no interaction with existing and adjacent coatings Excellent early load capacity with component movement Available in matt colours – harmonises perfectly with matt surfaces Fungicidal formula – resistance to mould growth Non-corrosive to unprotected metal surfaces Standards and tests Tested to EN 15651 – Part 1: F EXT-INT CC 25 LM Tested to EN 15651 – Part 2: G CC 25 LM Tested fire behaviour to EN 13501: Class E Tested to ift guideline VE-04/2 Tested to the BEMMA scheme for museum and display case construction Meets the requirements of DIN 18540-F Meets the requirements of ISO 11600 G 25 LM KOMO certificate no. 33410 (the provisions of NPR 3577 must be observed) EMICODE® EC 1 Plus – very low emission Quality seal of the IVD – German sealants industry association – tested by ift Rosenheim French VOC emission class A+ Declared in Baubook Austria Compliant with Regulation (EC) No 1907/2006 (REACH) Suitable for applications in accordance with IVD data sheets no. 7+9+10+13+14+19-1+20+22+24+25+27+29+31+32+35 Get OTTOSEAL® S 120 now, the premium glazing silicone for versatile applications indoors and outdoors!

Content: 0.31 Litre (€29.74* / 1 Litre)

€9.22*
Details
OTTOSEAL® S125 Das Boden- und Sanitär-Silikon
OTTOSEAL® S125 The floor and sanitary silicone
OTTOSEAL® S 125 The low-odour floor and sanitary silicone OTTOSEAL® S 125 is a high-quality, neutral-curing one-part silicone sealant on an alkoxy basis for a wide range of applications indoors and outdoors. Thanks to its low-odour formulation, excellent mould resistance and outstanding durability, it is ideal for floor and connection joints as well as applications in sanitary areas. Properties: Low odour – no odour nuisance during application Fungicidal formula – effective protection against mould growth Available in many colours, including matt shades – for a harmonious overall look Non-corrosive to unprotected metal surfaces Very good weather, ageing and UV resistance Areas of application: Sealing floor and connection joints on floor coverings made of rubber, linoleum, vinyl, PVC as well as laminate, cork and wood Sealing expansion and connection joints in sanitary areas Mirror sealing in combination with materials such as ceramics, metal and glass Connection joints on windows and doors made of wood, metal and plastic Sealing facades, parapets and roller shutter boxes as well as metal constructions Movement joints between concrete slabs Sealing wooden and decorative worktops Standards and tests: Tested to EN 15651 – Part 1: F EXT-INT CC 25 LM Tested to EN 15651 – Part 3: XS 1 Tested to EN 15651 – Part 4: PW INT 12.5 E Tested fire behaviour: Class E to EN 13501 Declaration of safety for areas near foodstuffs (ISEGA tested) EMICODE® EC1 Plus – very low emission French VOC emission class: A+ Declared in Baubook Austria Additional advantages: Thanks to its ISEGA declaration of safety, OTTOSEAL® S 125 is perfectly suited for areas near foodstuffs. With its availability in many colour shades, including matt variants, a perfect visual match can be achieved.

Content: 0.31 Litre (€25.90* / 1 Litre)

€8.03*
Details
OTTOSEAL® S50 Das Glasklar-Silicon
OTTOSEAL® S50 The crystal-clear silicone
OTTOSEAL® S 50 – The crystal-clear silicone OTTOSEAL® S 50 is a transparent one-part acetoxy silicone sealant suitable for both indoor and outdoor use. Curing crystal clear, this sealant provides a secure, durable seal that has proven itself particularly in glass construction, display cases and shop windows. Areas of application: Glass construction Display cases and shop windows Properties: Very good weather, ageing and UV resistance Cures to a crystal-clear silicone – ideal for unobtrusive applications Transparent – for aesthetically demanding seals Standards and tests: Meets the requirements for fire behaviour to EN 13501: Class E French VOC emission class A+ Suitable for applications in accordance with IVD data sheets no. 30+31+35 It doesn't get any clearer! Rely on OTTOSEAL® S 50 for transparent, reliable sealing in your projects.

Content: 0.31 Litre (€78.52* / 1 Litre)

€24.34*
Details
OTTOSEAL® S70 Das Premium-Naturstein-Silikon
OTTOSEAL® S70 The premium natural stone silicone
The premium natural stone silicone OTTOSEAL® S 70 is the ideal choice for all marble and natural stone applications indoors and outdoors, without causing edge-zone staining. Available in a wide range of colours, OTTOSEAL® S 70 also offers matt shades and "textured" colours with a stone-like surface. Its excellent weather, ageing and UV resistance, together with protection against mould growth, ensure a long-lasting, aesthetically pleasing overall appearance. Please note: for the best smoothing result, we recommend using the special OTTO marble silicone smoothing agent. Areas of application Sealing and jointing on marble and all natural stones, e.g. sandstone, quartzite, granite, gneiss, porphyry etc., indoors and outdoors Sealing expansion joints in floor, wall and facade areas Sealing and jointing marble/natural stone swimming pools, including underwater joints For external mirror sealing in combination with natural stone Sealing painted and enamelled glass Joint filler between ceramic tiles and natural stone outdoors Movement-compensating bonding of natural stone to metal, e.g. stair treads to a metal structure Properties Also available in "textured" colours with a stone-like surface – harmonises with textured natural surfaces Also available in matt colours – harmonises with matt and glossy surfaces Fungicidal formula – resistance to mould growth Natural stone compatible to ISO 16938-1 – causes no edge-zone staining on natural stones Non-corrosive – causes no (rust) corrosion on unprotected metal surfaces Very good weather, ageing and UV resistance – for durable applications indoors and outdoors Standards and tests Tested to EN 15651 – Part 1: F EXT-INT 25 LM and F EXT-INT CC 20 LM Tested to EN 15651 – Part 3: XS 1 Tested to EN 15651 – Part 4: PW EXT-INT 25 LM – applies only to the matt shades of OTTOSEAL® S 70 – all other shades meet PW INT12.5 E Tested to ISO 16938-1 by SKZ Würzburg (test for edge-zone staining of natural stones by joint sealants) Tested to ASTM C 1248 by DL Laboratories New York (test for edge-zone staining of natural stones by joint sealants) Suitable for applications in accordance with IVD data sheets no. 1+3-1+3-2+9+14+23+25+27+30+31+35 Declaration of safety – tested for use near foodstuffs (ISEGA Forschungs- und Untersuchungs-Gesellschaft mbH, Aschaffenburg) Quality seal of the IVD – German sealants industry association – tested by ift Rosenheim Compliant with Regulation (EC) No 1907/2006 (REACH) French VOC emission class A+ Declared in Baubook Austria EMICODE® EC 1 Plus – very low emission For classification under building certification schemes, see sustainability data sheet Tested fire behaviour to EN 13501: Class E

Content: 0.31 Litre (€30.52* / 1 Litre)

€9.46*
Details
Tip
OTTOSEAL® S80 Das geruchsarme Naturstein-Silikon
OTTOSEAL® S80 The low-odour natural stone silicone
OTTOSEAL® S 80 – Low-odour natural stone silicone OTTOSEAL® S 80, the low-odour natural stone silicone, is the ideal solution for sealing and jointing marble as well as various natural stone types such as sandstone, quartzite, granite, gneiss and porphyry. Indoors and outdoors, it ensures durable, aesthetically pleasing joints. The fungicidal formula offers additional protection against mould growth. Areas of application: Sealing and jointing marble and all natural stones indoors and outdoors Expansion joints in floor, wall and facade areas Expansion and connection joints in sanitary areas Mirror sealing in combination with natural stone Joint filler between ceramic slabs and natural stone outdoors Movement-compensating bonding of natural stone to metal Properties: Also available in matt colours, perfect for matt surfaces Fungicidal formula for resistance to mould growth Natural stone compatible to ISO 16938-1 – causes no edge-zone staining Low odour for pleasant application Very good weather, ageing and UV resistance Be sure to use the special OTTO natural stone smoothing agent for tooling. OTTOSEAL® S 80 is tested to various standards, underlining its reliability and quality.

Content: 0.31 Litre (€30.52* / 1 Litre)

€9.46*
Details
OTTOSEAL® S94 Das neutrale Brandschutz-Silikon B1
OTTOSEAL® S94 The neutral-cure fire protection silicone B1
OTTOSEAL® S 94 – The neutral-cure fire protection silicone B1 OTTOSEAL® S 94 is a one-part oxime silicone sealant that is neutral-curing and MEKO-free. The sealant is distinguished by its high fire protection class B1 (flame-retardant) to DIN 4102 and offers very good weather, ageing and UV resistance. These properties make OTTOSEAL® S 94 ideal for indoor and outdoor applications with increased fire protection requirements. Product properties and advantages: B1 – flame-retardant: Classification to DIN 4102 for use where fire protection requirements are increased. Very elastic: High flexibility and movement capability for durable seals. Weather and UV resistance: Optimal for outdoor use and extreme conditions. Non-corrosive: No corrosion on unprotected metal surfaces. Paint compatible: To DIN 52452, but not paintable – no interaction with adjacent coatings. Areas of application: Sealing fire protection elements, e.g. fire-rated glazing. Joint sealing in areas with high fire protection requirements. Technical data: Flame-retardant: Building material class B1 to DIN 4102. Skin formation: approx. 10 minutes. Curing: approx. 2 mm in 24 hours at +23 °C / 50% r.h. Temperature resistance: -40 °C to +180 °C. Movement capability: 25%. Standards and tests: Tested to EN 15651 – Part 1: F EXT-INT CC 25 LM. Tested to EN 15651 – Part 2: G CC 25 LM. Tested to EN 15651 – Part 4: PW INT 12.5 E. Tested to DIN 4102-B1 – flame-retardant between solid mineral building materials (Holzforschung TU Munich). Tested to DIN 25415, Part 1 – very good decontaminability of the sealant surface (Federal Institute for Materials Research and Testing, Berlin). Quality seal of the IVD – German sealants industry association, tested by ift Rosenheim. Compliant with Regulation (EC) No 1907/2006 (REACH). With OTTOSEAL® S 94 you get a high-quality, flame-retardant sealant that is perfect for use in areas with high fire protection requirements. Ideal for fire-rated glazing and many other applications.

Content: 0.31 Litre (€32.45* / 1 Litre)

€10.06*
Details
SIKAFLEX® AT CONNECTION - Der Flexible 20x600 ml
SIKAFLEX® AT CONNECTION – The flexible one, 20x600 ml
Sikaflex® AT Connection is an outstanding one-component, isocyanate-free sealant based on silane-terminated polymer for civil engineering and building construction. It cures by reaction with atmospheric moisture to form an elastic sealant. This sealant is particularly suitable for use in living spaces, public buildings, schools and nurseries, as it is solvent-free and odour-neutral. Application: Thanks to its excellent adhesion to porous and smooth substrates, Sikaflex® AT Connection is ideal for connection joints in building construction. This includes windows and doors, roller shutter boxes, facades in metal construction, metal claddings and plastic components indoors and outdoors. Its suitability in accordance with the RAL installation guide deserves particular mention. Sikaflex® AT Connection is also used for certain fire-rated joint seals in horizontal and vertical building elements. Advantages: Very high UV resistance and colour stability Primerless application on many metals and plastics Particularly suitable for connection joint sealing in accordance with the RAL installation guide EMICODE EC1PLUS, very low emission Solvent-free Very good application properties, especially tooling and extrusion behaviour Very broad adhesion spectrum on porous and smooth building materials Permissible total deformation 25% Packaging: Foil sausage with 600 ml, 20 foil sausages per box Colours: Grey (equivalent to concrete grey), medium grey, white (equivalent to uniform white), light concrete grey, anthracite grey, black Test certificates: ISO 11 600 F 25 HM / 20 LM SKZ Würzburg Declaration of performance and CE marking to DIN EN 15651-1 – joint sealants for facade elements – classification F EXT-INT CC 25 LM CE marking and declaration of performance ETA 20/1111 based on EAD 350141-00-1106:2017 – fire protection and fire sealing products, linear joint and gap sealing EMICODE EC1PLUS, very low emission Cleanroom: CSM TVOC tested (ISO-AMC Class-4.6) Cleanroom: CSM biological resistance – very good DIN EN 13501-1 Class E (fire behaviour), flow behaviour 0 mm, very good (DIN EN ISO 10 563) Application notes: Air temperature: between +5 °C and +40 °C Substrate temperature: between +5 °C and +40 °C (the substrate temperature must be +3 °C above the dew point) Substrate moisture: dry Backing material: only closed-cell PE backing profiles / backer rods (available here in the shop) Note: Correct joint dimensioning must be observed and is described in the approval (ETA 20/1111). For further information, please contact us. Curing rate: ~2 mm/24 h (+23 °C / 50% r.h.) Skin formation time: ~60 min (+23 °C / 50% r.h.)

Content: 20 Piece (€6.84* / 1 Piece)

From €136.85*
Details
This website uses cookies to ensure the best experience possible. More information...