Go to homepage
€0.00*

Filter products

–
Allcon 10 Konstruktionsklebstoff
Allcon 10 construction adhesive
Allcon 10 construction adhesive – the original Weather-resistant per DIN EN 204 D4, test report available, bonds virtually all materials, one-component, easy handling, solvent-free, ageing-resistant, resistant to many chemicals, frost-proof, natural stone compatible, GEV-EMICODE® EC 1Plus – very low emission. Areas of application Bonding skirting boards and metal thresholds Fixing covers For installing cable ducts For levelling minor unevenness For repairing torn-out screws, hinges etc. For gluing wood Bonding foam (EPS), e.g. bath supports and insulating materials The applications are almost unlimited Not suitable for glass, surfaces containing bitumen or wax, PE, PP, PA, EPDM, PTFE and underwater bonding. Due to the wide variety of paint and coating qualities, a compatibility test is recommended before painting over. The paint must be elastic enough to allow application on this product. Application advantages Use with standard cartridge guns Load-bearing after just approx. 7 to 10 minutes Usable without primer Replaces many other adhesives and glues Safety in application Always the right product at hand Opened cartridge keeps for approx. 10 months, unopened approx. 18 months Good dosability Paintable and coatable Usable indoors and outdoors Technical data Curing: approx. 3 mm of Allcon10 per 24 hours; for full-surface bonding approx. 70% cured after 7 to 10 minutes – 100% after 30 to 45 minutes Base: polyurethane, moisture-curing Density: approx. 1.4 g/cm³ Tested: test report to DIN EN 204 D4 (waterproof gluing), per WATT 91 (+80° C) Odour: low odour Shelf life: approx. 10 months once opened, approx. 1½ years unopened Skin formation time: approx. 3 minutes at standard climate (+23° C/50% relative humidity) Storage: dry, at room temperature Gap bridging: approx. 1.0 cm Temperature: resistant from -40° C to +80° C (short-term +120° C) Workable: from +5° C to max. +40° C Viscosity: pasty Areas of application Joining wood, chipboard, fibreboards, MDF, coated boards, metals, aluminium, natural and artificial stone, concrete, marble, ceramics, plastics, gypsum boards, foam (EPS), rigid foam, acrylic, insulation and much more.

Content: 12 Piece (€16.19* / 1 Piece)

€194.25*
Details
EGO SMP 805 KLEB-& DICHTFIX
EGO SMP 805 KLEB-& DICHTFIX
EGO SMP 805 – SMP hybrid sealant for versatile adhesive & sealant applications EGO SMP 805 is a one-component elastic hybrid adhesive and sealant with a broad adhesion spectrum. This product is distinguished by its versatile applicability and silicone-free formulation. The sealant cures with atmospheric moisture to an elastic end product, making it ideal for bonding and for sealing connection joints. Why EGO SMP 805? Versatile applicability: Suitable for silicone-free applications indoors and outdoors on sensitive substrates such as natural stone, aluminium, concrete, stainless steel, enamel, fibre cement, glass, wood, ceramics, plastic, metal and render. Not suitable for: PP, PE, silicone, bitumen etc. Odourless, silicone-free, isocyanate-free, solvent-free: For environmentally friendly, user-friendly use. One-part system: Easy application  100% solvent-free: Environmentally friendly formulation. Odour-neutral: Pleasant application without unpleasant odours. Neutral-curing: No interaction with adjacent parts UV, ageing and weather resistant: Reliable protection in a wide range of application areas. Virtually no shrinkage: Ensures a permanently elastic bond. Paint compatible: Enables a visually appealing surface as required. Areas of application EGO SMP 805 is used in numerous areas, including: Foodstuffs Facades Industry Construction Automotive Roofs Windows Floors Caravans HVAC Household appliances Doors Footpaths Wood Metal Glass Concrete Rely on the versatility of EGO SMP 805 for durable adhesive & sealant applications. Order now for the highest quality and professional results!

Content: 20 Piece (€9.39* / 1 Piece)

€187.89*
Details
EGOSILICON 300 BAUDICHT Neutralsilikon
EGOSILICON 300 BAUDICHT neutral silicone
EGOSILICON 300 BAUDICHT – Neutral-curing silicone sealant for building seals EGOSILICON 300 is the ideal one-part silicone sealant for building seals. By reacting with atmospheric moisture, it vulcanises to an elastic end product and offers maximum flexibility and sealing performance. Areas of application EGOSILICON 300 is perfectly suited for connection and movement joints on all common substrates in the construction sector. Note that it is not suitable for natural stone, non-ferrous metals, EPDM, PE, PP, black coatings, Teflon or substrates containing bitumen, wax or paraffin. Properties One-part system 100% solvent-free Fungicidal (mould-inhibiting) formulation Neutral-curing UV, ageing and weather resistant Rely on the high quality of EGOSILICON 300 BAUDICHT for building seals. Order now and benefit from reliable sealing in a wide range of application areas such as masonry, facades, roofs, ventilation systems, cleanrooms, marine, transport, HVAC, electrical engineering, air-handling systems, wood, metal, glass, plastic, concrete, render and parquet.

Content: 0.31 Litre (€29.35* / 1 Litre)

€9.10*
Details
OTTOCOLL® M500 The water-resistant premium hybrid adhesive/sealant
OTTOCOLL® M500 The water-resistant premium hybrid adhesive/sealant
OTTOCOLL® M 500 – The premium hybrid adhesive for elastic, stress-equalising bonds The premium hybrid adhesive OTTOCOLL® M 500 is the ideal choice for elastic, stress-equalising bonds between the most diverse materials. Thanks to its excellent adhesion and application properties, the adhesive can be used without problems on many substrates without primer pre-treatment. Bonding is even possible on damp substrates. Once cured, the adhesive is also extremely water-resistant. Areas of application: Bonding stone, natural stone and ceramics Bonding painted and enamelled glass Bonding OTTOFLEX® waterproofing membrane / waterproofing and uncoupling membrane in the overlap area and with accessories such as sealing tape, waterproofing corners and sealing gaskets (per the requirements of ETAG 022 and tested to abP principles) Bonding mirrors to ceramics, glass, plastic, stainless steel, aluminium, wood, concrete etc. Bonding window sills, skirting boards, decorative trims and stair treads Bonding in body and vehicle construction, wagon and container construction, metal and apparatus engineering, shipbuilding Bonding in areas near foodstuffs Bonding and assembling the most diverse materials such as wood, wood-based materials, plastics, metals and mineral substrates Properties: Extremely water-resistant – for bonds subject to high water exposure Very good adhesion to many materials – usable on many materials without pre-treatment Natural stone compatible – causes no staining on natural stones Also adheres to damp substrates Elastic – compensates for movement Paintable / can be coated – please observe the application notes in the technical data sheet Silicone-free Isocyanate-free Standards and tests: Meets the fire behaviour requirements of EN 13501: Class E Declaration of safety – tested for use near foodstuffs (ISEGA Forschungs- und Untersuchungs-Gesellschaft mbH, Aschaffenburg) EMICODE® EC 1 Plus – very low emission French VOC emission class A+ Declared in Baubook Austria Tested in combination with OTTOFLEX® waterproofing membrane / waterproofing and uncoupling membrane for the issue of a general building-authority test certificate

Content: 0.31 Litre (€27.45* / 1 Litre)

€8.51*
Details
OTTOCOLL® P 83 Der hochelastische PU-Klebstoff
OTTOCOLL® P 83 The highly elastic PU adhesive
OTTOCOLL® P 83 – The highly elastic PU adhesive The highly elastic special PU adhesive OTTOCOLL® P 83 is perfect for vibration- and movement-compensating bonds. It does not foam and, once cured, withstands high chemical and very high mechanical loads. The adhesive also holds an ISEGA declaration of safety for areas near foodstuffs. Areas of application: Bonding in body, wagon and container construction, metal and apparatus engineering, shipbuilding Bonding and assembling the most diverse materials such as wood, wood-based materials, plastics, metals and mineral substrates Properties: Highly elastic – compensates for large movements Extremely resistant to mechanical stress – withstands high impact, shock and peel loads Good chemical resistance – usable in chemically highly stressed areas Does not foam – no weighting down necessary Silicone-free Standards and tests: Meets the fire behaviour requirements of EN 13501: Class E Declaration of safety – tested for use near foodstuffs (ISEGA Forschungs- und Untersuchungs-Gesellschaft mbH, Aschaffenburg) EMICODE® EC 1 Plus – very low emission French VOC emission class A+

Content: 0.31 Litre (€35.55* / 1 Litre)

€11.02*
Details
OTTOSEAL® A 205 Der Premium-Acryl-Dichtstoff
OTTOSEAL® A 205 The premium acrylic sealant
OTTOSEAL® A 205 – Premium acrylic sealant for perfect connection joints OTTOSEAL® A 205 is the premium acrylic sealant whose flexible properties make it suitable even for larger joint movements. Thanks to its paintability with standard emulsion paints and its resistance to yellowing or greying, it is the ideal choice for connection joints in interior finishing on walls and ceilings. Why OTTOSEAL® A 205? Flexible application: With 18% permissible total deformation to ISO 9046, the sealant is also suitable for large joint movements. No colour change: No yellowing or greying after curing, for a permanently appealing appearance. Frost-insensitive: Can be stored and transported for up to 48 hours at max. -10 °C. Paintable: Enables matching to the surrounding colour and elastic protective coatings. Good UV resistance: Long service life even in weathered areas. Areas of application For connection joints in plinth, wall and ceiling areas, e.g. on window sills and roller shutter boxes. Can also be used outdoors at temperatures above 5 °C. Properties at a glance Standards and tests: Tested to EN 15651 – Part 1 – F EXT-INT 12.5 P. Suitable for applications per IVD data sheets no. 12+16+20+29+31+32+35. Quality seal of the IVD – German sealants industry association – tested by ift Rosenheim. Compliant with Regulation (EC) No 1907/2006 (REACH). French VOC emission class A+. Declared in Baubook Austria. EMICODE® EC 1 Plus – very low emission. For classification under building certification schemes, see sustainability data sheet. Tested fire behaviour to EN 13501: Class E. Rely on OTTOSEAL® A 205 for perfect connection joints in interior finishing. Order now for the highest quality and professional results!

Content: 0.31 Litre (€8.65* / 1 Litre)

€2.68*
Details
OTTOSEAL® M 350 Der Glasfalz Hybrid-Dichtstoff
OTTOSEAL® M 350 The glazing rebate hybrid sealant
One-part hybrid polymer STP sealant for indoors and outdoors Areas of application Glazing rebate sealing on wooden windows Sealing connection joints on windows and doors made of wood, metal and plastic Sealing pipe and antenna penetrations Sealing joints on facades and metal constructions Sealing air-conditioning and ventilation systems Suitable for glazing systems with a free sealant bevel Va1 to DIN 18545 and ÖNORM 3724 Properties Non-corrosive to unprotected metal surfaces Silicone-free Paintable / can be coated – please observe the application notes in the technical data sheet Good weather and ageing resistance Standards and tests Tested to EN 15651 – Part 1: F EXT-INT CC 25 HM Tested to EN 15651 – Part 2: G CC 25 HM Tested fire behaviour to EN 13501: Class E Meets the requirements of DIN 18545, stress groups A and D Meets the requirements of ISO 11600 G 25 HM Suitable for use in HVAC systems in accordance with VDI 6022, Sheet 1, tested to DIN EN ISO 846 (Institute for Hygiene, Berlin) French VOC emission class A+ Declared in Baubook Austria Suitable for applications in accordance with IVD data sheets no. 9+12+20+24+27+29+31+32+35 Rely on the quality of this one-part hybrid polymer STP sealant for your building seals. Order now and benefit from its versatile applications!

Content: 0.3 Litre (€32.17* / 1 Litre)

€9.65*
Details
OTTOSEAL® S 17 Das neutrale Hochtemperatur-Silikon
OTTOSEAL® S 17 The neutral high-temperature silicone
OTTOSEAL® S 17 – The neutral high-temperature silicone OTTOSEAL® S 17 is a high-quality one-part silicone sealant on an oxime basis that is neutral-curing and MEKO-free. This silicone impresses with its very high temperature resistance and its non-corrosive properties. Thanks to its elasticity and good workability, the sealant is suitable for applications both indoors and outdoors. Product properties and advantages: High temperature resistance: Up to +285 °C, ideal for demanding applications at high temperatures. Non-corrosive: No attack on unprotected metal surfaces. Very elastic: Flexibility and resistance to mechanical stress. Good workability: Easy to apply and ideal for professional applications. Areas of application: Sealing and bonding cast-section boilers, flue gas boxes, tiled stoves and similar high-temperature applications For automotive applications, e.g. on engines and gearboxes Special properties: Temperature-resistant up to +285 °C Non-corrosive to unprotected metal surfaces Standards and tests: Meets the fire behaviour requirements of EN 13501: Class E French VOC emission class A+ Suitable for applications per IVD data sheets no. 31 and no. 35 Conclusion: With OTTOSEAL® S 17 you get an extremely temperature-resistant, elastic, non-corrosive sealant that is ideally suited for high-temperature applications as well as automotive use. Order now and benefit from the high quality and reliability of this product!

Content: 0.31 Litre (€50.00* / 1 Litre)

€15.50*
Details
Tip
Ottoseal® S100 - Das Premium-Sanitär-Silikon
Ottoseal® S100 – The premium sanitary silicone
The premium sanitary silicone OTTOSEAL® S 100 impresses with its excellent application properties, producing a visually flawless silicone joint in no time. To ensure this result lasts, OTTOSEAL® S 100 is particularly resistant to mould growth and bacteria. It also features very good weather, ageing and UV resistance. With over 80 different colour options, nothing stands in the way of a harmonious overall look. Areas of application Expansion and connection joints in floor and wall areas Expansion and connection joints in sanitary areas Sealing glass blocks Sealing profiled glass (e.g. Profilit glazing) Properties Excellent application properties – outstanding smoothing & modelling behaviour Very good weather, ageing and UV resistance – for durable applications indoors and outdoors Fungicidal and bacteriostatic formula – resistance to mould growth and bacteria Also available in matt colours – harmonises with matt surfaces Standards and tests Tested to EN 15651 – Part 1: F EXT-INT CC 25 LM Tested to EN 15651 – Part 2: G CC 25 LM Tested to EN 15651 – Part 3: XS 1 Tested to EN 15651 – Part 4: PW INT 12.5 E Suitable for applications per IVD data sheets no. 3-1+3-2+14+31+35 Quality seal of the IVD – German sealants industry association – tested by ift Rosenheim Compliant with Regulation (EC) No 1907/2006 (REACH) French VOC emission class A+ Declared in Baubook Austria EMICODE® EC 1 Plus – very low emission For classification under building certification schemes, see sustainability data sheet Tested fire behaviour to EN 13501: Class E

Content: 0.3 Litre (€26.00* / 1 Litre)

From €7.80*
Details
OTTOSEAL® S105 Das Sanitär-Silikon Kartusche
OTTOSEAL® S105 The sanitary silicone, cartridge
The sanitary silicone One-part acetoxy silicone sealant For indoors and outdoors Very good workability Durable joint Reliable protection against mould The sanitary silicone OTTOSEAL® S 105 is suitable for durable expansion and connection joints in sanitary areas that need to be highly resistant to mould growth as well as weather, ageing and UV resistant. Good workability and availability in many different colours further distinguish OTTOSEAL® S 105. Areas of application Sealing expansion and connection joints in sanitary areas Sealing expansion and connection joints in floor and wall areas Sealing profiled glass / glass blocks Properties Fungicidal formula – resistance to mould growth Very good weather, ageing and UV resistance Standards and tests Tested to EN 15651 – Part 1: F EXT-INT CC 25 LM Tested to EN 15651 – Part 2: G CC 25 LM Tested to EN 15651 – Part 3: XS 1 Tested fire behaviour to EN 13501: Class E EMICODE® EC 1 Plus – very low emission Quality seal of the IVD – German sealants industry association – tested by ift Rosenheim French VOC emission class A+ Declared in Baubook Austria Compliant with Regulation (EC) No 1907/2006 (REACH) Suitable for applications in accordance with IVD data sheets no. 3-1+3-2+14+31+35

Content: 0.31 Litre (€20.35* / 1 Litre)

€6.31*
Details
OTTOSEAL® S110 Das Premium-Neutral-Silicon
OTTOSEAL® S110 The premium neutral-cure silicone
With the neutral-curing premium construction silicone OTTOSEAL® S 110, you get the all-rounder among OTTO sealants. Whether you want to seal connection joints on windows and doors, joints on facades, metal constructions or profiled glass. This premium neutral-cure silicone is also the optimal choice for expansion and connection joints on precast concrete and aerated concrete elements or in sanitary areas, always achieving perfect, durable results. OTTOSEAL® S 110 is even tested for glazing rebate sealing on wooden windows and is ideal for jointing on glass elements. Areas of application: Expansion and connection joints on precast concrete and aerated concrete elements Sealing joints on facades and metal constructions Sealing connection joints on windows and doors made of wood, metal and plastic Sealing profiled glass (e.g. Profilit glazing) Glazing rebate sealing on wooden windows Suitable for jointing on glass elements Expansion and connection joints in sanitary areas Properties: Highly abrasion-resistant and smear-free per ift guideline VE-04/2 Smear-free cleaning Fungicidal formula – resistance to mould growth Compatible with PVB films per the criteria of ift guideline DI-02/1 Non-corrosive – causes no (rust) corrosion on unprotected metal surfaces Very good adhesion to many substrates even without primer Excellent early load capacity – safety in the production process Paint compatible to DIN 52452 (not paintable) No interaction with existing and adjacent coatings Very good weather, ageing and UV resistance For durable applications indoors and outdoors Standards and tests: Tested to EN 15651 – Part 1: F EXT-INT CC 25 LM Tested to EN 15651 – Part 2: G CC 25 LM Tested to EN 15651 – Part 3: XS 1 Tested to EN 15651 – Part 4: PW INT 12.5 E Tested to ift guideline VE-04/2 Meets the requirements of DIN 18540-F Meets the requirements of ISO 11600 G 25 LM Tested to FCBA (CTBA) L 114 (suitability of sealants for glazing rebate sealing on wooden windows) Declaration of safety – tested for use near foodstuffs (ISEGA Forschungs- und Untersuchungs-Gesellschaft mbH, Aschaffenburg) Suitable for applications in accordance with IVD data sheets no. 3-1+3-2+7+9+10+13+14+19-1+20+22+24+25+27+29+31+32+35 Quality seal of the IVD – German sealants industry association – tested by ift Rosenheim Compliant with Regulation (EC) No 1907/2006 (REACH) French VOC emission class A+ Declared in Baubook Austria EMICODE® EC 1 Plus – very low emission Tested fire behaviour to EN 13501: Class E

Content: 0.31 Litre (€22.65* / 1 Litre)

€7.02*
Details
OTTOSEAL® S117 Das Standard-Naturstein-Silikon
OTTOSEAL® S117 The standard natural stone silicone
The resilient natural stone silicone OTTOSEAL® S 117 is distinguished by freedom from edge-zone staining when sealing and jointing marble and various natural stone types such as sandstone, quartzite, granite, gneiss and porphyry. The special formulation guarantees durable joints indoors and outdoors, thanks to outstanding weather, ageing and UV resistance and a fungicidal formula. Note: for a smooth finish, we recommend using the special OTTO marble silicone smoothing agent. Areas of application: Sealing and jointing marble and all natural stones indoors and outdoors Sealing expansion joints in wall and facade areas Properties: Fungicidal formula – resistance to mould growth Natural stone compatible – causes no edge-zone staining on natural stones Non-corrosive – causes no (rust) corrosion on unprotected metal surfaces Very good weather, ageing and UV resistance – for durable applications indoors and outdoors Standards and tests: Tested to EN 15651 – Part 1: F EXT-INT CC 20 LM Tested to EN 15651 – Part 3: XS 1 Suitable for applications in accordance with IVD data sheets no. 3-1+3-2+14+23+25+27+31+35 French VOC emission class A+ Tested fire behaviour to EN 13501: Class E For classification under building certification schemes, see sustainability data sheet Simplify your natural stone projects with OTTOSEAL® S 117, the reliable natural stone silicone for long-lasting, aesthetically pleasing results.

Content: 0.31 Litre (€24.39* / 1 Litre)

€7.56*
Details
OTTOSEAL® S125 Das Boden- und Sanitär-Silikon
OTTOSEAL® S125 The floor and sanitary silicone
OTTOSEAL® S 125 The low-odour floor and sanitary silicone OTTOSEAL® S 125 is a high-quality, neutral-curing one-part silicone sealant on an alkoxy basis for a wide range of applications indoors and outdoors. Thanks to its low-odour formulation, excellent mould resistance and outstanding durability, it is ideal for floor and connection joints as well as applications in sanitary areas. Properties: Low odour – no odour nuisance during application Fungicidal formula – effective protection against mould growth Available in many colours, including matt shades – for a harmonious overall look Non-corrosive to unprotected metal surfaces Very good weather, ageing and UV resistance Areas of application: Sealing floor and connection joints on floor coverings made of rubber, linoleum, vinyl, PVC as well as laminate, cork and wood Sealing expansion and connection joints in sanitary areas Mirror sealing in combination with materials such as ceramics, metal and glass Connection joints on windows and doors made of wood, metal and plastic Sealing facades, parapets and roller shutter boxes as well as metal constructions Movement joints between concrete slabs Sealing wooden and decorative worktops Standards and tests: Tested to EN 15651 – Part 1: F EXT-INT CC 25 LM Tested to EN 15651 – Part 3: XS 1 Tested to EN 15651 – Part 4: PW INT 12.5 E Tested fire behaviour: Class E to EN 13501 Declaration of safety for areas near foodstuffs (ISEGA tested) EMICODE® EC1 Plus – very low emission French VOC emission class: A+ Declared in Baubook Austria Additional advantages: Thanks to its ISEGA declaration of safety, OTTOSEAL® S 125 is perfectly suited for areas near foodstuffs. With its availability in many colour shades, including matt variants, a perfect visual match can be achieved.

Content: 0.31 Litre (€25.90* / 1 Litre)

€8.03*
Details
OTTOSEAL® S18 Das Schwimmbad-Silikon
OTTOSEAL® S18 The swimming pool silicone
Swimming pool silicone OTTOSEAL® S 18 The swimming pool silicone OTTOSEAL® S 18 is a special sealant developed specifically for applications in and around swimming pools. With its high resistance to chlorine and disinfectants and to mechanical stress, as well as its high mould resistance, this sealant is perfect for joints in permanently wet areas – not only at the pool edge but also underwater. Areas of application Sealing swimming pools and baths Elastic jointing at the pool edge Properties Extremely resistant to permanent wet exposure Resistant to chlorinated and salt water Strong fungicidal formula – high resistance to mould growth Very good adhesion to many substrates even without primer (see primer table) Non-corrosive to unprotected metal surfaces High notch and tear resistance – withstands high mechanical stress Very good weather, ageing and UV resistance Standards and tests Meets the requirements for fire behaviour to EN 13501: Class E French VOC emission class A+ Suitable for applications in accordance with IVD data sheets no. 14+17+31+35 Further details One-part neutral-curing oxime silicone sealant – MEKO-free For indoors and outdoors Resistant to chlorinated water Very reliable against mould Very durable joint The swimming pool silicone OTTOSEAL® S 18 is the perfect choice for all your sealing projects in and around the pool. Order today and benefit from its excellent properties and easy application!

Content: 0.31 Litre (€36.29* / 1 Litre)

€11.25*
Details
OTTOSEAL® S70 Das Premium-Naturstein-Silikon
OTTOSEAL® S70 The premium natural stone silicone
The premium natural stone silicone OTTOSEAL® S 70 is the ideal choice for all marble and natural stone applications indoors and outdoors, without causing edge-zone staining. Available in a wide range of colours, OTTOSEAL® S 70 also offers matt shades and "textured" colours with a stone-like surface. Its excellent weather, ageing and UV resistance, together with protection against mould growth, ensure a long-lasting, aesthetically pleasing overall appearance. Please note: for the best smoothing result, we recommend using the special OTTO marble silicone smoothing agent. Areas of application Sealing and jointing on marble and all natural stones, e.g. sandstone, quartzite, granite, gneiss, porphyry etc., indoors and outdoors Sealing expansion joints in floor, wall and facade areas Sealing and jointing marble/natural stone swimming pools, including underwater joints For external mirror sealing in combination with natural stone Sealing painted and enamelled glass Joint filler between ceramic tiles and natural stone outdoors Movement-compensating bonding of natural stone to metal, e.g. stair treads to a metal structure Properties Also available in "textured" colours with a stone-like surface – harmonises with textured natural surfaces Also available in matt colours – harmonises with matt and glossy surfaces Fungicidal formula – resistance to mould growth Natural stone compatible to ISO 16938-1 – causes no edge-zone staining on natural stones Non-corrosive – causes no (rust) corrosion on unprotected metal surfaces Very good weather, ageing and UV resistance – for durable applications indoors and outdoors Standards and tests Tested to EN 15651 – Part 1: F EXT-INT 25 LM and F EXT-INT CC 20 LM Tested to EN 15651 – Part 3: XS 1 Tested to EN 15651 – Part 4: PW EXT-INT 25 LM – applies only to the matt shades of OTTOSEAL® S 70 – all other shades meet PW INT12.5 E Tested to ISO 16938-1 by SKZ Würzburg (test for edge-zone staining of natural stones by joint sealants) Tested to ASTM C 1248 by DL Laboratories New York (test for edge-zone staining of natural stones by joint sealants) Suitable for applications in accordance with IVD data sheets no. 1+3-1+3-2+9+14+23+25+27+30+31+35 Declaration of safety – tested for use near foodstuffs (ISEGA Forschungs- und Untersuchungs-Gesellschaft mbH, Aschaffenburg) Quality seal of the IVD – German sealants industry association – tested by ift Rosenheim Compliant with Regulation (EC) No 1907/2006 (REACH) French VOC emission class A+ Declared in Baubook Austria EMICODE® EC 1 Plus – very low emission For classification under building certification schemes, see sustainability data sheet Tested fire behaviour to EN 13501: Class E

Content: 0.31 Litre (€30.52* / 1 Litre)

From €9.46*
Details
Tip
OTTOSEAL® S80 Das geruchsarme Naturstein-Silikon
OTTOSEAL® S80 The low-odour natural stone silicone
OTTOSEAL® S 80 – Low-odour natural stone silicone OTTOSEAL® S 80, the low-odour natural stone silicone, is the ideal solution for sealing and jointing marble as well as various natural stone types such as sandstone, quartzite, granite, gneiss and porphyry. Indoors and outdoors, it ensures durable, aesthetically pleasing joints. The fungicidal formula offers additional protection against mould growth. Areas of application: Sealing and jointing marble and all natural stones indoors and outdoors Expansion joints in floor, wall and facade areas Expansion and connection joints in sanitary areas Mirror sealing in combination with natural stone Joint filler between ceramic slabs and natural stone outdoors Movement-compensating bonding of natural stone to metal Properties: Also available in matt colours, perfect for matt surfaces Fungicidal formula for resistance to mould growth Natural stone compatible to ISO 16938-1 – causes no edge-zone staining Low odour for pleasant application Very good weather, ageing and UV resistance Be sure to use the special OTTO natural stone smoothing agent for tooling. OTTOSEAL® S 80 is tested to various standards, underlining its reliability and quality.

Content: 0.31 Litre (€30.52* / 1 Litre)

€9.46*
Details
OTTOSEAL® S94 Das neutrale Brandschutz-Silikon B1
OTTOSEAL® S94 The neutral-cure fire protection silicone B1
OTTOSEAL® S 94 – The neutral-cure fire protection silicone B1 OTTOSEAL® S 94 is a one-part oxime silicone sealant that is neutral-curing and MEKO-free. The sealant is distinguished by its high fire protection class B1 (flame-retardant) to DIN 4102 and offers very good weather, ageing and UV resistance. These properties make OTTOSEAL® S 94 ideal for indoor and outdoor applications with increased fire protection requirements. Product properties and advantages: B1 – flame-retardant: Classification to DIN 4102 for use where fire protection requirements are increased. Very elastic: High flexibility and movement capability for durable seals. Weather and UV resistance: Optimal for outdoor use and extreme conditions. Non-corrosive: No corrosion on unprotected metal surfaces. Paint compatible: To DIN 52452, but not paintable – no interaction with adjacent coatings. Areas of application: Sealing fire protection elements, e.g. fire-rated glazing. Joint sealing in areas with high fire protection requirements. Technical data: Flame-retardant: Building material class B1 to DIN 4102. Skin formation: approx. 10 minutes. Curing: approx. 2 mm in 24 hours at +23 °C / 50% r.h. Temperature resistance: -40 °C to +180 °C. Movement capability: 25%. Standards and tests: Tested to EN 15651 – Part 1: F EXT-INT CC 25 LM. Tested to EN 15651 – Part 2: G CC 25 LM. Tested to EN 15651 – Part 4: PW INT 12.5 E. Tested to DIN 4102-B1 – flame-retardant between solid mineral building materials (Holzforschung TU Munich). Tested to DIN 25415, Part 1 – very good decontaminability of the sealant surface (Federal Institute for Materials Research and Testing, Berlin). Quality seal of the IVD – German sealants industry association, tested by ift Rosenheim. Compliant with Regulation (EC) No 1907/2006 (REACH). With OTTOSEAL® S 94 you get a high-quality, flame-retardant sealant that is perfect for use in areas with high fire protection requirements. Ideal for fire-rated glazing and many other applications.

Content: 0.31 Litre (€32.45* / 1 Litre)

€10.06*
Details
This website uses cookies to ensure the best experience possible. More information...