The hybrid adhesive for full-surface bonding OTTOSEAL® M 595 is perfectly suited for the full-surface bonding of wall panels or sandwich elements. The adhesive is easy to apply with a notched trowel, compensating for cavities and unevenness, and also adheres to damp substrates. Areas of application Bonding wall cladding panels indoors, e.g. in sanitary, kitchen and catering areas and in cold rooms Bonding and assembling the most diverse materials such as wood, wood-based materials, plastics, metals and mineral substrates Bonding OTTOFLEX® waterproofing membrane / waterproofing and uncoupling membrane in the overlap area and with accessories such as sealing tape, waterproofing corners and sealing gaskets (per the requirements of ETAG 022 and tested to abP principles) Properties Trowelable – quick, easy application with a notched trowel Compensates for unevenness on rough bonding surfaces Very good adhesion to many materials – usable on many materials without pre-treatment Also adheres to damp substrates Elastic – compensates for movement Paintable / can be coated – please observe the application notes in the technical data sheet Silicone-free Isocyanate-free Standards and tests Meets the fire behaviour requirements of EN 13501: Class E EMICODE® EC 1 Plus – very low emission French VOC emission class A+ Declared in Baubook Austria Suitable for applications per IVD data sheets no. 30+35 Tested in combination with OTTOFLEX® waterproofing membrane / waterproofing and uncoupling membrane for the issue of a general building-authority test certificate

OTTOFLEX® liquid membrane Product description OTTOFLEX® liquid membrane is a high-quality bonded waterproofing on a synthetic resin dispersion basis, developed specifically for use in damp and wet rooms under ceramic coverings and natural stone in the thin-bed method. It is ready to use and offers high crack-bridging and a very short drying time. Areas of application OTTOFLEX® liquid membrane is ideally suited as bonded waterproofing in damp and wet rooms under ceramic coverings and natural stone. It can be applied to various substrates such as gypsum, plasterboard, gypsum fibre, render, (aerated) concrete, masonry and screed. Properties Synthetic resin dispersion on a butadiene-styrene basis Suitable for indoor use Easy to apply by rolling, brushing or trowelling High crack-bridging Very short drying time of 2 to 3 hours Silicone-compatible and solvent-free Sealing against moisture Compatible with standard tile adhesives and solvent-free coatings Complies with building material class B2 "normally flammable" to DIN 4102-1 Meets water exposure classes W0-I, W1-I and W2-I for crack class R1-I to DIN 18534 GISCODE BSW10 French VOC emission class A EMICODE® EC 1 Plus – very low emission Application notes Stir OTTOFLEX® liquid membrane well before use. Apply with a short-pile lambskin or foam roller. First seal the wall corners and the corners between wall and floor with OTTOFLEX® sealing tape. Apply OTTOFLEX® liquid membrane in an even layer thickness to wall and floor. After a drying time of at least 1 hour, carry out a second application. The waterproofing must be carried out in at least 2 steps with different colours (contrast). Standard tile adhesives in the thin-bed method can be applied to the liquid membrane after approx. 2–3 hours. For floor waterproofing, extend at least 5 cm up the wall and cover with the plinth. Wall waterproofing must extend at least 20 cm above the highest water outlet (e.g. shower head). Given the many possible influences during processing and application, always carry out a trial application first. Note on the scope of delivery: These containers include the colour paste required for the second application. Order OTTOFLEX® liquid membrane now for reliable bonded waterproofing in wet rooms!

OTTOCOLL® M 500 – The premium hybrid adhesive for elastic, stress-equalising bonds The premium hybrid adhesive OTTOCOLL® M 500 is the ideal choice for elastic, stress-equalising bonds between the most diverse materials. Thanks to its excellent adhesion and application properties, the adhesive can be used without problems on many substrates without primer pre-treatment. Bonding is even possible on damp substrates. Once cured, the adhesive is also extremely water-resistant. Areas of application: Bonding stone, natural stone and ceramics Bonding painted and enamelled glass Bonding OTTOFLEX® waterproofing membrane / waterproofing and uncoupling membrane in the overlap area and with accessories such as sealing tape, waterproofing corners and sealing gaskets (per the requirements of ETAG 022 and tested to abP principles) Bonding mirrors to ceramics, glass, plastic, stainless steel, aluminium, wood, concrete etc. Bonding window sills, skirting boards, decorative trims and stair treads Bonding in body and vehicle construction, wagon and container construction, metal and apparatus engineering, shipbuilding Bonding in areas near foodstuffs Bonding and assembling the most diverse materials such as wood, wood-based materials, plastics, metals and mineral substrates Properties: Extremely water-resistant – for bonds subject to high water exposure Very good adhesion to many materials – usable on many materials without pre-treatment Natural stone compatible – causes no staining on natural stones Also adheres to damp substrates Elastic – compensates for movement Paintable / can be coated – please observe the application notes in the technical data sheet Silicone-free Isocyanate-free Standards and tests: Meets the fire behaviour requirements of EN 13501: Class E Declaration of safety – tested for use near foodstuffs (ISEGA Forschungs- und Untersuchungs-Gesellschaft mbH, Aschaffenburg) EMICODE® EC 1 Plus – very low emission French VOC emission class A+ Declared in Baubook Austria Tested in combination with OTTOFLEX® waterproofing membrane / waterproofing and uncoupling membrane for the issue of a general building-authority test certificate

The uncoupling bonded waterproofing For uncoupling, crack-bridging, watertight bonded waterproofing in floor areas Areas of application Uncoupling, crack-bridging, watertight bonded waterproofing in floor areas Bonded waterproofing in damp and wet rooms under ceramic coverings and natural stone in the thin-bed method Flexible bonded waterproofing under ceramic coverings and natural stone on balconies, terraces and covered walkways (not above occupied rooms) with a slope ≥ 1.5% Properties Optimal for critical substrates Very high extensibility and crack-bridging Fast further processing Ageing-resistant Waterproofing membrane with a strong uncoupling effect Impermeable to water and vapour-retarding Alkali-resistant per the test principles of abP bonded waterproofing with tiles and slabs and per ETAG 022 Standards and tests Complies with water exposure classes W0-I, W1-I, W2-I and W3-I for crack class R1-I to DIN 18534 Meets moisture exposure classes A and C per abP and A0 and B0 per the ZDB data sheet General building-authority test certificate – sheet waterproofing bonded with tile and slab coverings for use as structural waterproofing Exposure classes to ÖNORM B 3407 – W1, W2, W3, W4, W5 and W6 EMICODE® EC 1 Plus – very low emission French VOC emission class A+

The premium sanitary silicone OTTOSEAL® S 100 impresses with its excellent application properties, producing a visually flawless silicone joint in no time. To ensure this result lasts, OTTOSEAL® S 100 is particularly resistant to mould growth and bacteria. It also features very good weather, ageing and UV resistance. With over 80 different colour options, nothing stands in the way of a harmonious overall look. Areas of application Expansion and connection joints in floor and wall areas Expansion and connection joints in sanitary areas Sealing glass blocks Sealing profiled glass (e.g. Profilit glazing) Properties Excellent application properties – outstanding smoothing & modelling behaviour Very good weather, ageing and UV resistance – for durable applications indoors and outdoors Fungicidal and bacteriostatic formula – resistance to mould growth and bacteria Also available in matt colours – harmonises with matt surfaces Standards and tests Tested to EN 15651 – Part 1: F EXT-INT CC 25 LM Tested to EN 15651 – Part 2: G CC 25 LM Tested to EN 15651 – Part 3: XS 1 Tested to EN 15651 – Part 4: PW INT 12.5 E Suitable for applications per IVD data sheets no. 3-1+3-2+14+31+35 Quality seal of the IVD – German sealants industry association – tested by ift Rosenheim Compliant with Regulation (EC) No 1907/2006 (REACH) French VOC emission class A+ Declared in Baubook Austria EMICODE® EC 1 Plus – very low emission For classification under building certification schemes, see sustainability data sheet Tested fire behaviour to EN 13501: Class E