The hybrid adhesive for full-surface bonding OTTOSEAL® M 595 is perfectly suited for the full-surface bonding of wall panels or sandwich elements. The adhesive is easy to apply with a notched trowel, compensating for cavities and unevenness, and also adheres to damp substrates. Areas of application Bonding wall cladding panels indoors, e.g. in sanitary, kitchen and catering areas and in cold rooms Bonding and assembling the most diverse materials such as wood, wood-based materials, plastics, metals and mineral substrates Bonding OTTOFLEX® waterproofing membrane / waterproofing and uncoupling membrane in the overlap area and with accessories such as sealing tape, waterproofing corners and sealing gaskets (per the requirements of ETAG 022 and tested to abP principles) Properties Trowelable – quick, easy application with a notched trowel Compensates for unevenness on rough bonding surfaces Very good adhesion to many materials – usable on many materials without pre-treatment Also adheres to damp substrates Elastic – compensates for movement Paintable / can be coated – please observe the application notes in the technical data sheet Silicone-free Isocyanate-free Standards and tests Meets the fire behaviour requirements of EN 13501: Class E EMICODE® EC 1 Plus – very low emission French VOC emission class A+ Declared in Baubook Austria Suitable for applications per IVD data sheets no. 30+35 Tested in combination with OTTOFLEX® waterproofing membrane / waterproofing and uncoupling membrane for the issue of a general building-authority test certificate

OTTOFLEX® sealing tape The premium sealing tape for optimal application Areas of application Bonded waterproofing in damp and wet rooms under ceramic coverings and natural stone Elastic sealing gasket for the permanently watertight sealing of floor areas at pipe penetrations under tiles, slabs and ceramic coverings Sealing at butt joints and component transitions Sealing in corner formations to bridge cracks and joints Properties Special elastomer tape, fully fleece-laminated on both sides, for indoors and outdoors Extremely elastic, ageing-resistant, highly tear-resistant Compatible with standard tile adhesives and solvent-free coatings Secure bond with OTTOFLEX® liquid membrane / waterproofing slurry / waterproofing membrane / waterproofing and uncoupling membrane Fold marking for optimal application Metre scale for precise work Practical dispenser box packaging Standards and tests Tested per the test principles for the issue of a general building-authority test certificate Water exposure classes W0-I, W1-I, W2-I and W3-I for crack class R1-I to DIN 18534 Water exposure class W1-B for crack classes R0-B and R1-B to DIN 18535 Moisture exposure classes A0 and B0 per ZDB and abP A, B, C Exposure classes W1, W2, W3, W4, W5 and W6 to ÖNORM B 3407 French VOC emission class A+ EMICODE® EC 1 Plus – very low emission

OTTOFLEX® deep primer Product description OTTOFLEX® deep primer is a high-quality synthetic resin dispersion on a butadiene-styrene basis, developed for the adhesion-improving priming and consolidation of substrates. It is solvent-free and ideally suited for indoors and outdoors. Areas of application OTTOFLEX® deep primer is used for priming and consolidating absorbent and less absorbent substrates. It is particularly suitable for plasterboard, gypsum and lime-gypsum renders, gypsum planks, gypsum fibreboards, concrete, aerated concrete, sand-lime brick, brick, masonry, renders, screeds, anhydrite and mastic asphalt screeds as well as various building boards and trowelable floor-levelling compounds. Properties Synthetic resin dispersion on a butadiene-styrene basis Adhesion improvement and consolidation of the substrate Increases load-bearing capacity Dilutable up to 1:2 with water Solvent-free Penetrates deep into the substrate Forms a very good bonding agent for subsequent application layers Improves the adhesion of renders, tile adhesives and wallpaper Store and transport frost-free Complies with exposure classes W1 and W2 to ÖNORM B 3407 GISCODE BSW20 EMICODE® EC 1 Plus – very low emission French VOC emission class A+ Application notes Dilute OTTOFLEX® deep primer 1:1 to 1:2 with water and mix thoroughly. Apply evenly to absorbent and highly absorbent cement-bound substrates with a lambskin roller, brush or paintbrush. Repeat the process for highly absorbent substrates if necessary. After the deep primer has dried, subsequent layers such as tile adhesive, renders or wallpaper can be applied. On screeds with old covering-adhesive residues, apply OTTOFLEX® deep primer undiluted and avoid puddle formation. For consolidating gypsum renders, anhydrite substrates and mastic asphalt screeds, likewise apply undiluted. After drying, the surfaces can be painted, rendered or wallpapered. The drying time depends on ambient factors and is around 2 hours at +20 °C and 50% relative humidity. Consumption depending on substrate condition and absorbency: 100–200 ml/m² diluted, 100–150 ml/m² undiluted. OTTOFLEX® deep primer is the ideal choice for effective substrate pre-treatment before tiling and renovation work. Order now for reliable priming and consolidation!

The hybrid adhesive for full-surface bonding OTTOSEAL® M 595 is perfectly suited for the full-surface bonding of wall panels or sandwich elements. The adhesive is easy to apply with a notched trowel, compensating for cavities and unevenness, and also adheres to damp substrates. Areas of application Bonding wall cladding panels indoors, e.g. in sanitary, kitchen and catering areas and in cold rooms Bonding and assembling the most diverse materials such as wood, wood-based materials, plastics, metals and mineral substrates Bonding OTTOFLEX® waterproofing membrane / waterproofing and uncoupling membrane in the overlap area and with accessories such as sealing tape, waterproofing corners and sealing gaskets (per the requirements of ETAG 022 and tested to abP principles) Properties Trowelable – quick, easy application with a notched trowel Compensates for unevenness on rough bonding surfaces Very good adhesion to many materials – usable on many materials without pre-treatment Also adheres to damp substrates Elastic – compensates for movement Paintable / can be coated – please observe the application notes in the technical data sheet Silicone-free Isocyanate-free Standards and tests Meets the fire behaviour requirements of EN 13501: Class E EMICODE® EC 1 Plus – very low emission French VOC emission class A+ Declared in Baubook Austria Suitable for applications per IVD data sheets no. 30+35 Tested in combination with OTTOFLEX® waterproofing membrane / waterproofing and uncoupling membrane for the issue of a general building-authority test certificate

OTTOFLEX® preformed external corner External corner with special elastomer sealing layer, fully fleece-laminated on both sides For indoors and outdoors Preformed for optimal application Extremely elastic and tear-resistant Ageing-resistant Areas of application Bonded waterproofing in damp and wet rooms under ceramic coverings and natural stone Elastic waterproofing corners for the permanently watertight sealing of external corners under tiles, slabs and ceramic coverings Properties Secure bond: Perfectly combinable with OTTOFLEX® liquid membrane, waterproofing slurry, waterproofing membrane and waterproofing/uncoupling membrane Preformed: For optimal, easy application Extremely elastic and tear-resistant: Ensures long-lasting, secure waterproofing Ageing-resistant: Long service life without loss of quality Standards and tests DIN 18534: Complies with water exposure classes W0-I, W1-I, W2-I and W3-I for crack class R1-I DIN 18535: Complies with water exposure class W1-B for crack classes R0-B and R1-B for tank locations S1-B and S2-B ZDB and abP: Meets moisture exposure classes A0 and B0 ÖNORM B 3407: Complies with exposure classes W1, W2, W3, W4, W5 and W6 VOC emission class: French VOC emission class A+ EMICODE® EC 1 Plus: Very low emission Application notes Easy application: The preformed external corner is designed specifically for quick, easy installation. Ideal for use in damp and wet rooms. High-quality materials: The external corner, fleece-laminated on both sides with a special elastomer sealing layer, ensures reliable, durable waterproofing. Advantages Time saving: Preformed for quick, easy application Safety: Guarantees watertight sealing solutions Compatibility: The perfect complement to OTTOFLEX® waterproofing systems Order the OTTOFLEX® preformed external corner now and secure a reliable, durable waterproofing solution for your damp and wet rooms!