OTTOFLEX® deep primer Product description OTTOFLEX® deep primer is a high-quality synthetic resin dispersion on a butadiene-styrene basis, developed for the adhesion-improving priming and consolidation of substrates. It is solvent-free and ideally suited for indoors and outdoors. Areas of application OTTOFLEX® deep primer is used for priming and consolidating absorbent and less absorbent substrates. It is particularly suitable for plasterboard, gypsum and lime-gypsum renders, gypsum planks, gypsum fibreboards, concrete, aerated concrete, sand-lime brick, brick, masonry, renders, screeds, anhydrite and mastic asphalt screeds as well as various building boards and trowelable floor-levelling compounds. Properties Synthetic resin dispersion on a butadiene-styrene basis Adhesion improvement and consolidation of the substrate Increases load-bearing capacity Dilutable up to 1:2 with water Solvent-free Penetrates deep into the substrate Forms a very good bonding agent for subsequent application layers Improves the adhesion of renders, tile adhesives and wallpaper Store and transport frost-free Complies with exposure classes W1 and W2 to ÖNORM B 3407 GISCODE BSW20 EMICODE® EC 1 Plus – very low emission French VOC emission class A+ Application notes Dilute OTTOFLEX® deep primer 1:1 to 1:2 with water and mix thoroughly. Apply evenly to absorbent and highly absorbent cement-bound substrates with a lambskin roller, brush or paintbrush. Repeat the process for highly absorbent substrates if necessary. After the deep primer has dried, subsequent layers such as tile adhesive, renders or wallpaper can be applied. On screeds with old covering-adhesive residues, apply OTTOFLEX® deep primer undiluted and avoid puddle formation. For consolidating gypsum renders, anhydrite substrates and mastic asphalt screeds, likewise apply undiluted. After drying, the surfaces can be painted, rendered or wallpapered. The drying time depends on ambient factors and is around 2 hours at +20 °C and 50% relative humidity. Consumption depending on substrate condition and absorbency: 100–200 ml/m² diluted, 100–150 ml/m² undiluted. OTTOFLEX® deep primer is the ideal choice for effective substrate pre-treatment before tiling and renovation work. Order now for reliable priming and consolidation!

OTTOFLEX® bonding primer Product description OTTOFLEX® bonding primer is a high-quality synthetic resin dispersion on a butadiene-styrene basis, developed specifically for the adhesion-improving priming of absorbent substrates. The solvent-free formulation makes it ideally suited for use both indoors and outdoors. Areas of application The OTTOFLEX® bonding primer is used for pre-treating absorbent and highly absorbent substrates such as plasterboard, gypsum components, render, concrete, aerated concrete, masonry, stone, screed as well as chipboard or wood fibreboards. It is particularly recommended as a primer before applying OTTOFLEX® liquid membrane. Properties Synthetic resin dispersion on a butadiene-styrene basis Optimal for absorbent substrates Very short drying time Solvent-free Meets moisture exposure classes A0 per the ZDB data sheet and A per abP in combination with OTTOFLEX® liquid membrane Store and transport frost-free Complies with exposure classes W1 and W2 to ÖNORM B 3407 GISCODE BSW10 French VOC emission class A+ EMICODE® EC 1 Plus – very low emission Application notes Stir or shake well before use. Apply OTTOFLEX® bonding primer evenly with a brush, scrubbing brush or wide paintbrush. Clean tools with water after use. The drying time depends on ambient factors such as temperature, air movement, humidity and the absorbency of the substrate. At +20 °C and 50% relative humidity, the drying time is around 2 hours. A trial application is recommended before the actual application. Use OTTOFLEX® bonding primer for reliable priming of absorbent substrates and optimise your construction projects now!