SIKAFLEX® PRO-1

OTTOSEAL® M 360 – The silicone-free hybrid sealant for high-quality construction applications The silicone-free hybrid sealant OTTOSEAL® M 360 impresses with its fast, shrink- and bubble-free curing and its paintability. It delivers optimal results for a wide range of construction and expansion joints indoors and outdoors – and does so long-term. Also ideal for closing cracks and holes in facades and interior walls, as occur in scaffolding and painting work. In addition, the sealant is excellently suited to the building connection joint between window and facade. Areas of application: Construction joints to DIN 18540-F Sealing joints on facades and metal constructions Expansion and connection joints on precast concrete and aerated concrete elements Bonding OTTO building connection tapes BAB-V and BAB-VD to masonry, concrete, aerated concrete etc. Building connections, e.g. window frame connections, doors, gates and drywall connections to the building shell such as wall openings, as well as transitions e.g. from concrete wall to timber stud wall/glass wall Closing cracks and holes in facades and interior walls, e.g. in scaffolding/painting work Properties: Tack-free surface after approx. 6 hours Lower risk of soiling Silicone-free Isocyanate-free Low odour Pleasant to work with Paintable / can be coated – please observe the application notes in the technical data sheet Decorative paint finish and protective coating possible Good weather and ageing resistance For durable applications indoors and outdoors Cures bubble-free Suitable for visually demanding joints Temperature resistance from -40 °C to +90 °C Standards and tests: Tested to EN 15651 – Part 1: F EXT-INT CC 25 LM / ISO 11600-F-25LM Component test "air impermeability and driving rain resistance of a sealing system between window and building shell to ift guideline MO-01" Standing water test in accordance with the guideline "Building waterproofing – connection to floor-level windows and doors, Part 2" together with the Remmers waterproofing system "liquid membrane with fleece backing" EMICODE® EC 1 Plus – very low emission Suitable for applications in accordance with IVD data sheets no. 7+9+12+19-1+20+22+24+27+29+31+32+35 Compliant with Regulation (EC) No 1907/2006 (REACH) For classification under building certification schemes, see sustainability data sheet French VOC emission class A+ Declared in Baubook Austria Tested fire behaviour to EN 13501: Class E

SikaHyflex®-250 Facade – Elastic, weather-resistant high-performance sealant for facades SikaHyflex®-250 Facade is a moisture-curing, elastic one-part high-performance sealant based on i-Cure™ polyurethane technology for building construction. It is designed specifically for joint sealing in accordance with DIN 18540, but is also suitable for connection joints. Application: For joints in building construction that must be sealed in accordance with the rules of DIN 18540. Also suitable for connection joints on windows and doors, concrete and rendered facades, natural stone facades, balcony parapets and gallery railings, and many other components. SikaHyflex®-250 Facade can also be used for certain fire-rated joint seals in horizontal and vertical building elements. However, this is only done in combination with a suitable fire protection joint cord. Advantages: Meets DIN 18 540-fb Very good adhesion to common building materials in combination with the appropriate pre-treatments Solvent-free, odourless Very good ageing and weather resistance Excellent application properties, very good tooling Permissible total deformation 25% (7.5% in combination with fire protection joint cord as a fire-rated joint) Low stress on the joint flanks Bubble-free curing Tack-free surface Test certificates: DIN 18 540-fb, SKZ Würzburg ISO 11 600 F 25 LM, SKZ Würzburg CE marking and declaration of performance to DIN EN 15651-1 – joint sealants for facade elements – classification F EXT-INT CC 25 LM CE marking and declaration of performance ETA 20/1111 based on EAD 350141-00-1106:2017 – fire protection and fire sealing products – linear joint and gap sealing EMICODE EC1PLUS, very low emission Declaration of safety for contact with foodstuffs, ISEGA DIN EN 13501-1 Class E (fire behaviour) Substrate pre-treatment: The joint flanks must be load-bearing, firm, clean, dry and free of oil, grease, loose particles, cement laitance, paints, water repellents and anti-graffiti coatings.