Polyethylene waterproofing membrane with special fleece on both sides Our polyethylene waterproofing membrane with special fleece on both sides offers reliable waterproofing indoors and outdoors and is ideal for damp and wet rooms under ceramic coverings and natural stone in the thin-bed method. Areas of application: Bonded waterproofing in damp and wet rooms under ceramic coverings and natural stone in the thin-bed method (e.g. bathrooms, shower facilities, swimming pools, saunas, steam baths, but also industrial areas in the food industry such as breweries and dairies) Flexible bonded waterproofing under ceramic coverings and natural stone on balconies, terraces and covered walkways (not above occupied rooms) with a slope ≥ 1.5% Our OTTOFLEX® waterproofing membrane is distinguished by its high extensibility, crack-bridging and ageing resistance. It is watertight and vapour-retarding and provides secure anchoring of the tile adhesive applied on top. Properties: Watertight: The waterproofing membrane is impermeable to water and vapour-retarding, offering reliable protection against moisture. High extensibility and crack-bridging: Thanks to its high practical extensibility and crack-bridging, the waterproofing remains permanently intact. Ageing-resistant: The membrane is ageing-resistant and rot-proof, ensuring a long service life. Good resistance: It shows good resistance to aqueous solutions of salts, acids and alkalis. Rely on the quality and dependability of our polyethylene waterproofing membrane for effective waterproofing in a wide range of applications. Discover its many advantages now!

Internal corner, fleece-laminated on both sides, for indoors and outdoors Areas of application: Bonded waterproofing in damp and wet rooms under ceramic coverings and natural stone Elastic waterproofing corners for the permanently watertight sealing of internal corners under tiles, slabs and ceramic coverings Properties: Secure bond with OTTOFLEX® liquid membrane, waterproofing slurry, waterproofing membrane and waterproofing/uncoupling membrane Preformed for optimal application Extremely elastic and tear-resistant Ageing-resistant Standards and tests: Complies with water exposure classes W0-I, W1-I, W2-I and W3-I for crack class R1-I to DIN 18534 Complies with water exposure class W1-B for crack classes R0-B and R1-B for tank locations S1-B and S2-B to DIN 18535 Meets moisture exposure classes A0 and B0 per ZDB and abP A, B, C Complies with exposure classes W1, W2, W3, W4, W5 and W6 to ÖNORM B 3407 French VOC emission class A+ EMICODE® EC 1 Plus – very low emission

OTTOCOLL® M 500 – The premium hybrid adhesive for elastic, stress-equalising bonds The premium hybrid adhesive OTTOCOLL® M 500 is the ideal choice for elastic, stress-equalising bonds between the most diverse materials. Thanks to its excellent adhesion and application properties, the adhesive can be used without problems on many substrates without primer pre-treatment. Bonding is even possible on damp substrates. Once cured, the adhesive is also extremely water-resistant. Areas of application: Bonding stone, natural stone and ceramics Bonding painted and enamelled glass Bonding OTTOFLEX® waterproofing membrane / waterproofing and uncoupling membrane in the overlap area and with accessories such as sealing tape, waterproofing corners and sealing gaskets (per the requirements of ETAG 022 and tested to abP principles) Bonding mirrors to ceramics, glass, plastic, stainless steel, aluminium, wood, concrete etc. Bonding window sills, skirting boards, decorative trims and stair treads Bonding in body and vehicle construction, wagon and container construction, metal and apparatus engineering, shipbuilding Bonding in areas near foodstuffs Bonding and assembling the most diverse materials such as wood, wood-based materials, plastics, metals and mineral substrates Properties: Extremely water-resistant – for bonds subject to high water exposure Very good adhesion to many materials – usable on many materials without pre-treatment Natural stone compatible – causes no staining on natural stones Also adheres to damp substrates Elastic – compensates for movement Paintable / can be coated – please observe the application notes in the technical data sheet Silicone-free Isocyanate-free Standards and tests: Meets the fire behaviour requirements of EN 13501: Class E Declaration of safety – tested for use near foodstuffs (ISEGA Forschungs- und Untersuchungs-Gesellschaft mbH, Aschaffenburg) EMICODE® EC 1 Plus – very low emission French VOC emission class A+ Declared in Baubook Austria Tested in combination with OTTOFLEX® waterproofing membrane / waterproofing and uncoupling membrane for the issue of a general building-authority test certificate

The premium sanitary silicone OTTOSEAL® S 100 impresses with its excellent application properties, producing a visually flawless silicone joint in no time. To ensure this result lasts, OTTOSEAL® S 100 is particularly resistant to mould growth and bacteria. It also features very good weather, ageing and UV resistance. With over 80 different colour options, nothing stands in the way of a harmonious overall look. Areas of application Expansion and connection joints in floor and wall areas Expansion and connection joints in sanitary areas Sealing glass blocks Sealing profiled glass (e.g. Profilit glazing) Properties Excellent application properties – outstanding smoothing & modelling behaviour Very good weather, ageing and UV resistance – for durable applications indoors and outdoors Fungicidal and bacteriostatic formula – resistance to mould growth and bacteria Also available in matt colours – harmonises with matt surfaces Standards and tests Tested to EN 15651 – Part 1: F EXT-INT CC 25 LM Tested to EN 15651 – Part 2: G CC 25 LM Tested to EN 15651 – Part 3: XS 1 Tested to EN 15651 – Part 4: PW INT 12.5 E Suitable for applications per IVD data sheets no. 3-1+3-2+14+31+35 Quality seal of the IVD – German sealants industry association – tested by ift Rosenheim Compliant with Regulation (EC) No 1907/2006 (REACH) French VOC emission class A+ Declared in Baubook Austria EMICODE® EC 1 Plus – very low emission For classification under building certification schemes, see sustainability data sheet Tested fire behaviour to EN 13501: Class E