Kamin-Dicht (up to +1,500° C)

Heat-resistant special sealant

One-component, extremely heat-resistant, up to +1,500° C, broad adhesion spectrum, fast-setting, ageing-resistant, solvent-free, silicone-free, asbestos-free.

Application advantages:

• Ready to use
• Excellent adhesion
• No cracking after curing
• Suitable for standard cartridge guns
• Good dosability
• Easy application

Areas of application:

• Joint sealing on boilers and fireplaces
• Sealing on stoves and other high-temperature areas
• Fire-resistant sealing between building elements

Technical data:

• Curing: approx. 4 to 5 mm per day (depending on layer thickness)
• Base: polyacrylate
• Density: approx. 1.82 g/ml
• Shelf life: unopened 12 months, at +5° C to +25° C; use up promptly once opened
• Storage: at +5° C to +25° C; cool and dry
• Temperature resistance: up to +1,500° C
• Workable: from +5° C to max. +30° C
• Viscosity: pasty

Application:

The joint flanks must be load-bearing, dry and free of dust and grease; clean with beko Allclean if necessary. For a flawless seal, correct joint dimensioning of 5 to 15 mm and appropriate pre-treatment are necessary. Slightly moisten absorbent substrates. Apply beko Kamin-Dicht into the joint under flank pressure. Given the wide variety of substrates, an adhesion and compatibility test is recommended before use. To avoid bubble formation, beko Kamin-Dicht should be warmed up slowly. The surface can be cleaned with water after curing.

Notes:

• Does not adhere to PP, PE and PTFE.
• The colour may fade under permanently high temperatures.
• No product liability is accepted in the event of improper use.
• For professional or industrial use only.