W-Stop repair sealing compound Highly elastic fibre sealing compound, permanently elastic and extensible, ready to use, seals immediately, weather-resistant, fast, secure adhesion, not frost-sensitive, trowelable and spreadable. Application advantages Can be applied in rain and snow Can also be used under water High adhesion to almost all substrates Gap bridging of several millimetres in width Paintable Areas of application Closing cracks and holes Sealing on roofs, ventilation pipes and ducts, sewage pipes, skylight domes, sheet metal claddings etc. Adheres to stone, masonry, concrete, brick, glass, corrugated asbestos, bitumen membranes and roofing felt, tar, metal, sheet metals such as copper, zinc, lead and aluminium, as well as wood and rigid PVC Technical data Curing: 1 to 1.5 mm/day Base: synthetic rubber, fibre-reinforced Elongation at break: approx. 120% Density: approx. 0.95 kg/l Yield: 1 to 2 litres/m² Curing system: through physical drying Shelf life: 24 months, unopened Skin formation time: 2 to 10 minutes Storage: at approx. +25° C, not frost-sensitive Shore A hardness: approx. 20 Sag resistance: non-sag Temperature: resistant from -25° C to +100° C Workable: from -10° C to +40° C Viscosity: pasty, elastic Features Seals immediately Fibre-reinforced Ready to use Weather-resistant Permanently elastic and extensible Not frost-sensitive High gap bridging Workable down to -10° Trowelable and spreadable

Hydro-Stop liquid coating, semi-liquid – Bucket Product description The Hydro-Stop liquid coating is a one-component, highly flexible sealant for permanent structural waterproofing. It meets the requirements of DIN 18195 and is silicone-, bitumen- and solvent-free. The coating is UV-resistant, weatherproof and ageing-resistant. After full curing, it is even walkable – ideal also for repair work on flat roofs, terraces or balconies. Application advantages Self-levelling, semi-liquid consistency for easy application on floors Crack bridging of up to 5 mm Application without a fleece insert for ground moisture or non-accumulating water Ready to use – no mixing necessary Applicable on slightly damp, mineral substrates (e.g. concrete) Application with a roller, trowel or brush Also usable as a joint casting compound Areas of application Floor coatings (semi-liquid version – self-levelling) Wall and plinth areas (pasty variant) Waterproofing terraces, balconies, penetrations and connections Suitable per DIN 18195: Part 4: against ground moisture and non-accumulating seepage water Part 5: against non-pressing water in wet rooms and on ceiling surfaces Part 6: against externally pressing water and accumulating seepage water Technical data Base: one-component mixed polymer Curing: after approx. 24 hours at +20 °C Application quantity: at least 2 mm dry layer thickness Coverage: approx. 3 kg/m² with a double application Crack bridging: up to 5 mm Shore A hardness: approx. 25 Temperature resistance: -40 °C to +90 °C Workable: from +5 °C to +35 °C (material: +15 °C to +25 °C) Shelf life: 12 months (in the original container) Storage: cool and dry